cobra21987

Got a 04 cobra with a Mach one 8.8 rear end in it. Where do I get a good rebuild kit that can handle alot of torque

Blackvenom01

well what all do you want to rebuild just the shims then napa advanced auto american musle but if you wanna start replacing the differential axles and gears then thats alittle diff story

Timspony

Sounds like he wants a good carrier & axles!!!!

darkmach1

Get a Trac-lok, cheap and rebuildable.

cobra21987

Lol just need like a bearing kit cause my pinion bearing failed so might as well change all the bearings correct

Timspony

Call Tousley Ford: 1-800-328-9552 and ask for Steve .... American Muscle also sells a a 8.8" bearing kit!

http://www.americanmuscle.com/frpp-8...kit-gt500.html

cobra21987

Will that kit from American muscled be able to handle what I got

SVTeeshirt

yes lol, its just a rebuild kit, i mean one of your axels could still break if you're leaving super hard.... Idk if you have a stock mach rear or what....

The link Tim posted says for 07-11GT-500s... i wonder whats different about their 8.8 and if it would actually work for your car....

http://www.americanmuscle.com/rearendrebuild.html

would be the one you wanted i do belive.

Blackvenom01

might not be a bad idea to fully build your rear if you have the money before something breaks again like an axle

Timspony

Here's another link at AM http://www.americanmuscle.com/frpp-8...-kit-8604.html