03 cobra motor with a 5 speed
#1
03 cobra motor with a 5 speed
ok my buddy just got a 98 gt like myself and wants to throw an 03 cobra engine in it but doesn't want to pay for the 6 speed trans will the 5 speed of the same year work or not? any advantages to having a 6 over a 5
#2
The 6 speed can handle more power, it's quicker, and will yield a faster top end (if the power is there). I'm not sure however wether they go together easily. I know it has been done, but I'm not sure how easily. Sorry if I'm not much help. Have you tried searching and looking through threads on similar topics?
#6
another question
ok if he is replacing the drive shaft does he get one for the year of the car like this one http://www.americanmuscle.com/96gtand96coa.html or for the year of motor/trans
what about the exhaust 98 or 03
what about the exhaust 98 or 03
Last edited by rridor4; 01-06-2012 at 04:17 AM.
#7
youll prolly have to measure the driveshaft distance and get a custom one...the placement of things may not be the same therefore a long or shorter drive shaft
exhaust should be 98 since your using the hangers and it has the solid rear...if you got 03 it would be 03 hangers and IRS
exhaust should be 98 since your using the hangers and it has the solid rear...if you got 03 it would be 03 hangers and IRS
#8
ok if he is replacing the drive shaft does he get one for the year of the car like this one http://www.americanmuscle.com/96gtand96coa.html or for the year of motor/trans
what about the exhaust 98 or 03
what about the exhaust 98 or 03
96-97 have different hanger locations as well as 99-01 and 03-04 cobras which have the IRS.
Thread
Thread Starter
Forum
Replies
Last Post
MustangForums Editor
Mustang News, Concepts, Rumors & Discussion
3
11-10-2015 11:39 AM
musnicki
Classic Mustang General Discussion
8
09-23-2015 07:11 AM
MustangForums Editor
Street/Strip
5
09-08-2015 06:25 PM