Shelby CS69's Installed
 

Here she is fresh off the rack from Discount Tire, need to install the Eibach Pro Kit as soon as possible. The wheels are 20x9 all the way around with 255/35/20 tires. I know most of you would prefer wider rear wheels and tires but I couldn't pass up the deal I got on this set. Any ideas on where to get the Eibach Pro Kit installed?

u could do it urself. its not very difficult. at least on the 05-09s its not

Try Dallas mustang, located at Sandhill road near 635east. But you have to schedule in advance. Check out their website

You can comfortably go to sportlines with your combo

There is a Mustang shop over on Hwy 3 near Nasa Rd One but it's an easy install. The rear is real simple but the front is trickier because you have to decompress the springs, but it is possible to do without even using a spring compressor. If you don't know what you are doing, though, I wouldn't recommend the job as the forces at work can be dangerous. I've had the suspension apart numerous times to replace strut bearing but that's another story (track use).

Thanks for the advise, I decided to take it over to Strictly Performance in Pearland, for the price it's worth my time not to mess with it on my own. I will post some pics when it's all done.

LOL, I didn't realize Strictly Performance is right around the block from my house. I think I may have to check them out for headers.

Installed, much flatter around the turns now.

http://i1124.photobucket.com/albums/...rter022511.jpg

http://i1124.photobucket.com/albums/...left022511.jpg