Cat back or axle back
#2
#5
Try replacing the stock resonator with an X-pipe. The stock GT V8 mufflers are sweet, by replacing the restrictive resonator with an X-pipe, this will really wake up the stock mufflers and give you some great exhaust sounds I added a Legato axle back system in place of the stock mufflers and wish I'd have done the X-pipe/resonator swap first before I did the axle back change. If you go the axle back way, the Legato system consists of flowmaster 40 mufflers.
https://legatoperformance.com/produc...-gt-v8-exhaust
https://legatoperformance.com/produc...-gt-v8-exhaust
#8
Depends. If you plan to do it yourself, and don't have access to a lift, cutting tools, welding tools, etc, and don't wanna pay someone who knows how much for the work, then get a cat back. You could easily do it in about 1 hour on ramps with hand tools. And considering the price for brands like MBRP (just over $500), it really pays to get a cat-back.
I got mine for a little over $500 and I got a $75 rebate on it. The night before it arrived I yanked the stock exhaust off. I have a convertible so I had to remove the rear subframe brace. It took about an hour. The next day when the catback arrived I went right back to it and installed it in about 1-1/2 hours. On the hard top you probably won't have to remove the brace so that would save about half the time. Even if you do it still is no problem at all. So basically, under $500 after rebates, about 2 hours of my time, and I got the 409 stainless steel Race version. And everyone has given me compliments.
However, the Race has lots of drone especially on the vert because the vert has less sound deadening. So take that into consideration. It'll break in and the drone will decrease tho. But some people who bought the Street version said they prefer the Race. Another good brand that is pretty cheap is Solo.
I got mine for a little over $500 and I got a $75 rebate on it. The night before it arrived I yanked the stock exhaust off. I have a convertible so I had to remove the rear subframe brace. It took about an hour. The next day when the catback arrived I went right back to it and installed it in about 1-1/2 hours. On the hard top you probably won't have to remove the brace so that would save about half the time. Even if you do it still is no problem at all. So basically, under $500 after rebates, about 2 hours of my time, and I got the 409 stainless steel Race version. And everyone has given me compliments.
However, the Race has lots of drone especially on the vert because the vert has less sound deadening. So take that into consideration. It'll break in and the drone will decrease tho. But some people who bought the Street version said they prefer the Race. Another good brand that is pretty cheap is Solo.
#9
What is your goal & what are you looking to accomplish long term? If you would like to speak about your future plans ... I can put you in contact with one of our build experts & point you in the right direction based on your feedback.
Happy to help ... you can reach me at tim@steeda.com to start the conversation.
Best Regards,
TJ
Happy to help ... you can reach me at tim@steeda.com to start the conversation.
Best Regards,
TJ