Mustang Catch Can/Oil Separator - MustangForums.com


The New S550 2015-2019 Mustang Discussions on the newest generation of the Ford Mustang.

Reply
 
 
 
Thread Tools Search this Thread
Old 07-16-2018, 11:20 AM   #1  
jcastag
Thread Starter
 
Join Date: Apr 2018
Location: New Jersey
Posts: 16
Default Mustang Catch Can/Oil Separator

Hey everyone, I wanted to install a catch can on my 2017 GT Convertible, but at $150+ the parts seem to be MASSIVELY overpriced. I was wondering if anyone has used a part below, or something similar:

Amazon Amazon

Also, does anyone know where you can get the hose kit only that comes with some of the kits designed for the car. I like the custom fit look that those hoses would provide.
jcastag is offline   Reply With Quote
Old 07-16-2018, 12:40 PM   #2  
08'MustangDude
4th Gear Member
 
Join Date: Jan 2018
Location: Pennsylvania
Posts: 1,151
Default

I got mine on eBay for $25.00, and it even has a baffle, place for stainless mesh,
and a measuring dip stick.


I know, mine is a V6, but just showing you that you can do it yourself much cheaper.

Steeda has ones that start at $110, to $115.

The reason you're paying $150, is all the correct fittings come with the kit.
https://www.summitracing.com/search/...del/gt-premium

Though I paid $25.00 for the catch can, I paid $10.00 more for the braided hose.
Still cheaper, but I cut my PCV ends off, and clamped the hoses on to those to
retain factory removal and installation of the hoses.
https://mustangforums.com/forum/v6-s...ml#post8616456

You're only supposed to need the catch on the passenger side PCV.
08'MustangDude is offline   Reply With Quote
Old 07-16-2018, 12:50 PM   #3  
99GTvert
is my username.
 
99GTvert's Avatar
 
Join Date: May 2006
Location: Earth
Posts: 13,554
Default

How much oil does your DIY catch can collect? Some of the $150+ seem to collect maybe a table spoon full between oil changes while others collect that much after only 500 miles or so.
99GTvert is offline   Reply With Quote
Old 07-16-2018, 02:30 PM   #4  
08'MustangDude
4th Gear Member
 
Join Date: Jan 2018
Location: Pennsylvania
Posts: 1,151
Default

They all collect a lot more than a table-spoon. I got about that within 5000 miles,
and the can is nowhere near full. Mine is small, which is 5" Height x 3.25" Diameter,
holds at least 10 ounces. They have a smaller one that's 250ml or 8 ounces of fluid.
A table spoon is 15ml, or 0.5oz.
08'MustangDude is offline   Reply With Quote
Old 07-16-2018, 02:44 PM   #5  
jcastag
Thread Starter
 
Join Date: Apr 2018
Location: New Jersey
Posts: 16
Default

ended up ordering the one from amazon...I will try to use the current PCV hose and cut it

wish I didbt spend $200 on the can for my Camaro
jcastag is offline   Reply With Quote
Old 07-17-2018, 12:36 PM   #6  
1 Alibi 2
3rd Gear Member
 
1 Alibi 2's Avatar
 
Join Date: Jan 2015
Location: Hackettstown, N.J.
Posts: 575
Default

$ 50.00 Jegs unit, spliced into the stock Ford tubing.
.



.
1 Alibi 2 is offline   Reply With Quote
Old 07-17-2018, 05:43 PM   #7  
08'MustangDude
4th Gear Member
 
Join Date: Jan 2018
Location: Pennsylvania
Posts: 1,151
Default

I have made catch cans from in-line Air Compressor moisture separators...
$23.00 at Lowes, they used to be, +2 fittings and some hose.


However, you NEED ridged hose here, as vacuum will collapse fuel, trans, or
coolant hose if you don't line them with stainless steel spring of the same diameter.

That's why I bought AN10 stainless braided hose.
08'MustangDude is offline   Reply With Quote
Old 07-18-2018, 10:05 AM   #8  
1 Alibi 2
3rd Gear Member
 
1 Alibi 2's Avatar
 
Join Date: Jan 2015
Location: Hackettstown, N.J.
Posts: 575
Default

Quote:
Originally Posted by 08'MustangDude View Post

However, you NEED ridged hose here, as vacuum will collapse fuel, trans, or
coolant hose if you don't line them with stainless steel spring of the same diameter.


That's why I bought AN10 stainless braided hose.
.
Using the Ford OEM tubing is working just fine, the set-up on the 2011 has been installed since 2012..
.
1 Alibi 2 is offline   Reply With Quote
Old 07-18-2018, 10:10 AM   #9  
1 Alibi 2
3rd Gear Member
 
1 Alibi 2's Avatar
 
Join Date: Jan 2015
Location: Hackettstown, N.J.
Posts: 575
Default

.....

Last edited by 1 Alibi 2; 07-18-2018 at 10:12 AM. Reason: duplicate post
1 Alibi 2 is offline   Reply With Quote
Old 07-18-2018, 02:39 PM   #10  
08'MustangDude
4th Gear Member
 
Join Date: Jan 2018
Location: Pennsylvania
Posts: 1,151
Default

Quote:
Originally Posted by 1 Alibi 2 View Post
.
Using the Ford OEM tubing is working just fine, the set-up on the 2011 has been installed since 2012..
.
Yeah, I know, it's hard plastic line, not rubber hosing. If you're making your OWN catch
can, and need custom length hosing, you need ridged hosing, which is why I used AN10
braided stainless line. If you're getting a $25.00 universal catch can, you're gonna be
customizing your hoses. It ain't coming with ford fittings on it for ford lines... The
hose the universal kits come with, you may as well just throw in the garbage....

I cut the fittings off the OEM tubing, and clamped them to the AN10 lines.

All I said was, you cannot use rubber hose for trans, fuel, or coolant, they will
collapse, unless you coil them with stainless, which we do at the shop,
in top of using ridged line. I said nothing about anyone's specific setup. Also
the coiling also helps whip oil out of the vapor...

We have started using transparent 10mm hard line, then we put 10mm stainless
coils inside the length hose as well. Things keep changing in the auto world,
people like certain things, apparently, they want to see a coil spring inside a
transparent hose that will turn color inside from the oil anyway...

They call it; Stainless steel inner hose support coil... Can you use it with the crap
hose? Sure, but for the price of the hose and coil, you can buy AN10/15 stainless
steel braided hosing, for less...
08'MustangDude is offline   Reply With Quote
 
 
Reply

Related Topics
Thread Thread Starter Forum Replies Last Post
StangTV Quick Tech: UPR Dual Valve Catch Can Oil Separator For EcoBoost UPRSharad 2.3L Eco-Boost Tech 0 05-19-2015 10:23 PM
!*! JLT oil separator catch can !*! redvertstang Parts For Sale 7 05-19-2011 08:56 PM
HMS Oil Separator Catch Can HaneyMotorsport.Com Saleen, Roush and Boss Mustangs 7 06-23-2008 07:13 PM
NEW Oil Separator Catch Can HaneyMotorsport.Com 4.6L (1996-2004 Modular) Mustang 0 06-12-2008 02:14 PM
HMS Oil Separator Catch Can HaneyMotorsport.Com Vendor For Sale / Group Buy Classifieds 0 06-11-2008 03:31 PM


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump

Advertising
Featured Sponsors
Vendor Directory

All times are GMT -5. The time now is 02:47 AM.


© 2018 MH Sub I, LLC dba Internet Brands
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.