coreyzessin

i know i have bugged you alot and i am new to the ford mods and i am not quite sure on the sites to find alot of aftermarket parts for the stang. do you have some good sites on where to get performance parts, shifters etc? thanks alot man

brent4

somebody has a crush on shizzle..lol jp. if you're looking for a shifter and a few other basic mods then try americanmuscle and stangmods. theres a mf discount out there somewhere.

coreyzessin

cool much appreciated man and i am also looking to do the nite shade on the tails also do you know of a step by step process that would be helpful?

brent4

wash your tail lights, dry them, hit them with some rubbing alcohol and dry them again, spray a light coat of the Nite shade on the lens, allow time to dry, wet sand, then start applying clear coat and between each coat wet sand. I think that should do it. Nite shade is easy to use but also easy to screw up.

moontang

I have always wet sanded prior to the first coat and in between every other coat use light coats and after you put you last coat of clear on wet sand then use rubbing compund then polish take your time and they will come out smoothe also use 2k grit

Shaunmac9128

Yeah wetsand first it gives the first layer something to "cling to"