4.0 SOHC Stroker
#4
RE: 4.0 SOHC Stroker
Wonder if it's gunna be like the guy up in canada and be a reground stock crank with way too small of a rod journal to put any power too.
I have personally Broke 2 cranks just with a naturally asperated motor.
I have personally Broke 2 cranks just with a naturally asperated motor.
#5
RE: 4.0 SOHC Stroker
Just checking with you guys on the east coast if you would be interested in a 4130 forged stroker crank and a pair of billet cams I have been tinkering with.
I am out of SOCAL and have been doing some R&Dwith the desert guys for a while.
If enough people show interest than I might make a run of parts.
I am out of SOCAL and have been doing some R&Dwith the desert guys for a while.
If enough people show interest than I might make a run of parts.
#6
RE: 4.0 SOHC Stroker
Well it takes a while to research, develop, refine, and then produce something as complex as stroker kits. Like Cobra232 said, wait a while, www.supersixmotorsports.com is working on it.
#7
RE: 4.0 SOHC Stroker
Tell me about it,I have had to make all my own parts for the last four or five years.
I have narrowed it down to 120 days for my new cranks.I have about 12 pairs of billet cams out there running but thats all I made at first.I have run about every combo amaginable in these things.
i am in the middle of fitting the cosworth heads on it now.Its gunna be a screemer!
I have had our engine over 8500 RPM and it loved it.
I have narrowed it down to 120 days for my new cranks.I have about 12 pairs of billet cams out there running but thats all I made at first.I have run about every combo amaginable in these things.
i am in the middle of fitting the cosworth heads on it now.Its gunna be a screemer!
I have had our engine over 8500 RPM and it loved it.
Thread
Thread Starter
Forum
Replies
Last Post
MEISTERSNFB
4.0L V6 Technical Discussions
6
03-31-2020 07:50 AM