Sn-95 3.8L Exhaust Clip Thread
 

Welcome to the new Sn-95 V6 forum exhaust clip thread.

OK here are the requirements:
The clip should be recorded with at least decent quality and sound. Please no clips where we can't hear your car or with raspy sound or white noise caused by wind.

*) Upload the clip to a permanent web host such as youtube do not use private sites, facebook, myspace, etc. This is part of the reason half of our old clips from the original exhaust thread no longer work.

*) The clip should display your cars exhaust tone through out the entire power band. Dynos are perfect clips.

*) Please keep the clips short, I don't want to see a movie, just a short exhaust clip.

*) Interior view clips are welcome but please couple them with an exterior clip as that's the sound everybody will be looking for.

*) If at any point in time you remove the video from the original web host please remove it from here, videos/links that do not work will be subject to deletion.

*) Drive by clips are welcome but please couple them with a normal exterior clip displaying the exhaust through out the power band.

*) Please list your performance mods in your post as they will effect the tone of the exhaust. Oh and of course your exhaust set up.

*) Most important exhaust clip post only, no discussion or technical question post/replies just exhaust clips, any other post made are subject to deletion.

*) Have fun guys and with your help lets keep this one going!!!

BBK 70mm Throttle Body
Mac Cold Air Intake
MAC Long Tube Headers
MAC Off-Road H-Pipe
MAC Cat Back Exhaust
No cats installed

http://www.youtube.com/watch?v=aSq9Tr5N_W0

http://www.youtube.com/watch?v=3GMoohiXdaQ

Long tubes, catted H with dynomax high flows, 2.5" pipes with force pro series mufflers

http://www.youtube.com/watch?v=BAt48NYAl9A
http://www.youtube.com/watch?v=ae3hIW0G7Bo

Some clips from the original thread that still work:

HR&B
No Crossover, 2.25" Flowmaster 40 Series Catback
http://www.youtube.com/watch?v=nr1m-5JXZcA

MustangMike2001
94-98 headers, divorced duals, Force Pro Series mufflers, GT take off's[/align]
http://www.youtube.com/watch?v=jtzc8SFp2Oo

1999Mustang2000
K&N CAI, Pypes o/r x-pipe, Flowmaster 40's
http://www.youtube.com/watch?v=D7LKiMcBgl4

RyansQuick6
M-112 Supercharged
http://www.youtube.com/watch?v=lgGwhVerntA

Autobadges.com (Erick Valdez old member)
Vortech Supercharger, Borla Side Exhaust, Bassani O/R X Pipe, JBA Headers, Ported Intakes, Ported Heads w/3 Angle Valve Job, 214/225 Custom Cam, 56mm Throttle Body
http://www.youtube.com/watch?v=hDFb30VXGok

Flowmaster 10 Series-Single Port V6
 

Single Chamber Flowmaster mufflers.
http://www.youtube.com/watch?v=5-Hhb...ature=youtu.be

1997 3.8 V6 Mustang
Stock Headers, All 4 Cats, 2.25" Divorce Duals, Flow Master 10's, 2.5" Tail Pipes.
http://www.youtube.com/watch?v=yRnlV...yer_detailpage:icon_munching:

1999 3.8 V6 Mustang
MAC Long Tubes, MAC O/R H, Thrush Welded Series, 3.5" Tips, 2.5" piping

http://www.youtube.com/watch?v=MS6Eg2DWsPM

1999 3.8 V6 Mustang
MAC Longtubes, MAC O/R H, Roush Side Exhaust Mufflers, 2.5" Piping

http://www.youtube.com/watch?v=O6HE1pnla4E&NR=1

Inside the car (highway) 4.2L M112 supercharged, H pipe, Spin Tech 333SCS side exit:

http://www.youtube.com/watch?v=kW0TWap5Qas


Outside the car (N/A 4.2L first test start) Same exhaust, no blower/no tune:


http://www.youtube.com/watch?v=OOFObAG0iZ0

[youtube]Nkv29Lhqwm0[/youtube]
intake
1/2`` intake spacer
stock headers and cats
2 1/4 piping h pipe
flowmasters 10`s
2 1/4 tailpipes 3.5 inch tips

MAC Longtubes, MAC O/R H Pipe 2 1/2", Bassani BX Dumped 2 1/4"

http://www.youtube.com/watch?v=Uc7ICeb-1lk