stangalang11

what are the symptoms? would the engine run?

BabyGT

So the washer didn't go so smooth through the engine then huh?? Ha ha ha, it would prolly tick and idle real rough.

Mike T

It ain't so funny now, huh?

jthorn9

Sheesh....I didn't didn't mean for you to take me up on that double dare lmao.

Depending on how bad the valve is damaged will depend on the severity of the symptoms. Generally ticking/pinging sounds, poor idle, and poor compression in relation to that cylinder are key indicators.

stangalang11

it is funny because it didnt damage anything like i previously stated in my other post.

oh ok jthorn, nah im gonna rebuild the old engine for a split port swap and put it in my 99 stang that currently has a blown motor, so i can sell the 95 to put toward the 66 stang thats been sitting in my garage for 3 years fund and have the 99 as a daily driver ha lots of work but it will be fun

BabyGT

So if it's running fine why the second thread on the same topic for something that's not happening? Is it running funny or what?

stangalang11

i was just curious to know the symptoms. its really not a big deal.