onadraw

I need your help. I bought a 2000 v6 with the top of the motor off and have now installed another motor. It runs but I have no idea what vacuum lines should be in there.

Can anyone offer some help with pics or a diagram?

Everything is now stock under the hood. Just need to sort out the vacuum lines.

onadraw

How about if I ask about a specific line?

On the back of the intake on the passenger side there is a 3/8 size port. I have that connected directly to the PCV. Anyone know if that is correct?

onadraw

Ok, I'll try a different line. On the passenger side, there is a 3/8 sized line that goes down under the receiver dryer and back toward the firewall. I have that one connected to the port on the air intake tube. Anyone know if that is correct?

onadraw

Can anyone recommend a more active Mustang forum for a v6 owner?

PNYXPRESS

If you can wait till tomorrow, I will be out where my 2000v6 is being stored and I can take some pics for you.

onadraw

That would be awesome, thanks

PNYXPRESS

I wasn't able to make it out there today as I ran out of daylight. I will most definitely be out there tommorrow afternoon though. As I have a crate of tools and engine parts to drop off.

onadraw

Thanks. I spent the day changing out my heater core.
Good times.

PNYXPRESS

Hope these help.

onadraw

Awesome, thank you