Sixxer rebuild
03-23-2013, 04:59 PM
MF Staff Snitch
Join Date: Jun 2006
Location: Scotia, NY
Posts: 7,035
03-24-2013, 06:35 PM
5th Gear Member
Thread Starter
Join Date: Mar 2008
Location: Clermont, FL
Posts: 2,952
Got the p/s fender installed and aligned the door today.
03-27-2013, 06:37 PM
5th Gear Member
Thread Starter
Join Date: Mar 2008
Location: Clermont, FL
Posts: 2,952
Installed the trunk lid, bumper cover and tail lights today.
03-31-2013, 02:45 PM
5th Gear Member
Join Date: May 2009
Location: Pennsylvania
Posts: 2,350
very impressive! looks like the seams are matching up nicely too
04-09-2013, 08:47 AM
5th Gear Member
Thread Starter
Join Date: Mar 2008
Location: Clermont, FL
Posts: 2,952
The p/s is ready to paint
D/s could probably be repaired but im gonna replace it anyways
Should have it replaced this week, then I just have to make a roof panel and send her to the paint booth.
04-09-2013, 06:08 PM
5th Gear Member
Join Date: Jan 2007
Location: Titusville, Fl
Posts: 2,697
you need to do the full glass roof like the s197's... hehehe
04-10-2013, 07:37 AM
5th Gear Member
Thread Starter
Join Date: Mar 2008
Location: Clermont, FL
Posts: 2,952
thought about it, but Im going with a carbon fiber panel.
05-11-2013, 01:38 PM
5th Gear Member
Thread Starter
Join Date: Mar 2008
Location: Clermont, FL
Posts: 2,952
Finally got around to pulling the d/s quarter off and prepping for the new one.
06-01-2013, 03:01 PM
5th Gear Member
Thread Starter
Join Date: Mar 2008
Location: Clermont, FL
Posts: 2,952
D/s quarter panel installed along with rear roof frame.
06-01-2013, 08:37 PM
The Godfather
Join Date: Sep 2005
Location: Temple, Texas
Posts: 15,481
With all that money spent you better be putting in a 03/04 Cobra engine and drivetrain.
04-09-2013, 08:47 AM
