Pony Fender Emblem… placement
04-05-2006, 05:59 PM
1st Gear Member
Thread Starter
Join Date: Feb 2006
Location: NYC
Posts: 67
Pony Fender Emblem… placement
I’ve seen many pictures of fender emblems put on in the wrong place on V6’s.
Here’s the correct location for anyone interested.
The proper placement is 5 1/4" & 5 3/8" from the door gap and 13 3/8" down from the hood/fender gap.
See illustration:
[IMG]local://upfiles/29880/DA4605D73CD046E68E48DEA9B0FF2227.jpg[/IMG]
04-05-2006, 06:00 PM
6th Gear Member
Join Date: Jul 2005
Posts: 5,172
RE: Pony Fender Emblem… placement
Good find, this should be a sticky! LOL. Very cool.
04-05-2006, 07:40 PM
5th Gear Member
Join Date: Aug 2005
Location: Boston, MA
Posts: 3,213
RE: Pony Fender Emblem… placement
useful, but wouldn't it be easier to measure from the lower crease on the fender rather than up to the seam, around a corner?
04-05-2006, 09:57 PM
1st Gear Member
Join Date: Mar 2006
Location:
Posts: 103
RE: Pony Fender Emblem… placement
torch vert has a GREAT point
04-05-2006, 10:46 PM
1st Gear Member
Thread Starter
Join Date: Feb 2006
Location: NYC
Posts: 67
RE: Pony Fender Emblem… placement
Using a cloth or paper tape measure it's much more accurate and easy to stretch it over the fender than to fold it into the crease on the bottom.
04-05-2006, 11:47 PM
5th Gear Member
Join Date: Jan 2006
Posts: 2,392
RE: Pony Fender Emblem… placement
Is this for the Pony Package Emblems or the Gt emblems cause if you look at the diagram closely you see Gt Rims?
04-06-2006, 01:58 AM
1st Gear Member
Thread Starter
Join Date: Feb 2006
Location: NYC
Posts: 67
RE: Pony Fender Emblem… placement
Pony Package,
that was just a random pic I used out of a service manual
04-06-2006, 11:05 AM
2nd Gear Member
Join Date: Jan 2006
Location:
Posts: 445
RE: Pony Fender Emblem… placement
I got the actual measurements when I was going to do mine, but I wound up adjusting it to put it where I liked it. (went better because of the side stripe IMO) This post would've made it easier to get the measurements though...I think that I asked like 3 times lol.
04-06-2006, 11:25 AM
1st Gear Member
Thread Starter
Join Date: Feb 2006
Location: NYC
Posts: 67
RE: Pony Fender Emblem… placement
looks good chidrock
04-06-2006, 11:39 AM
2nd Gear Member
Join Date: Jan 2006
Location:
Posts: 445
RE: Pony Fender Emblem… placement
Thanks! I tried to keep it from looking sloppy by using my pointer and thumb to measure it on both sides lol...jk