tino

Well since you turned out to be nice.....

There is an article in MM (Modified Mustangs) about inertia page 88 june issue.

It pretty much says 19 horses for a 11.5 flywheel, 8" clutch about 9 hp, recomend the aluninum driveshaft (apparently help balance by reducing drivetrain vibration).

Recomend you read it there are some interesting facts about inertia..... also I missed the prior article but there was a part I to the one in june.

Please let us know what you find with your inertia related Mods.... sounds pretty interesting.

Tino

ranebowcyxx

I saw on LMPerformance site that they have a carbon fiber drive shaft, weighs 22 pounds, they claim a 15 HP improvement, but at 1100 bucks I don;t know if it's worth it.

fazm

the bmr driveshaft is for the GT, not the v6, nobody makes one for the v6 yet....

LesteR723

i htink they covered it, and stock springs really arent that heavy... i have a set 2 ft away

chipschwab

Yeah thats where i got the idea to lighten everything up was from modified mustang and the chance of decreasing body vibration was in fox bodies

chipschwab

I red the june one too