Fig06

Now I know the one. I used a deep well socket and the edge on the garage floor to tap that one out !

tino

Thanks Guys

tino

Sorry for being a pest.....

But looking at this set of pics which one shows the pot metal...... Just hate to mess it up.

Thanks Again!

afixer

here you see it and remove it and put it into the red bushing. also pic #6

[IMG]local://upfiles/14019/1CEC1A681AF743CE8DBF0C1F02491192.jpg[/IMG]

tino

Thanks Afixer!!

afixer

no prob it was a real easy install. but if your car is lowered (thanks marty) and your an old fat guy like me its kinda tight. we jacked it up in front and used 2 jack stands to safety it off. it was actually a real simple mod. i just got pissed when i screwed the bushing. but i fixed it so all is good.

beaustang

Man, you guys are at it early! I just sent Tom some pics so he can post them to the forum. Every time I try to post pics they either are too big to post or when I resize them they are too small to see.

GIDDEUP

I went underneath again last weekend and checked my nuts and bolts and the bastard still rattles during acceleration in 3rd and 4th. Grrrr.

beaustang

I'm not getting any rattle at all; everything seems OK so far but it's only been one day. Oh yeah, I have to get it back up on a lift to put some lock tight on one of the nuts we forgot to do. I also just put on the T handle shift ****; it feels like 2nd to 3rd will be much more positive now. If I can figure out how to post a pic I'll share.

GIDDEUP

Yeah the rattle didn't really show up until a few days after install.