Justin_R

I might try, but I figure its going to get fixed soon so its not that big of a deal. But thanks for the suggestion.

Fizzie06

When are you having the rest of your stuff done???

Justin_R

Not sure but definetely soon, my goal is before the middle of July.

djl0657

JUSTIN,

I'm looking at duals on your car and if the TSB is for the stock exhaust, I don't see how the TSB would even apply. It's not a matter of "voiding your warranty", the parts affected aren't even on the car anymore. Just a thought. It sounds like a trip to the original exhaust shop is in order.

afixer

my duals had the vibration and the 2 hose clamps on the cross mount tsb worked no more vibration and i did it myself

Dean Martin

I also did it myself, two 4" hose clamps and half hour with a floor jack. Personally, if I can do it myself I never go to the dealer.

Justin_R

Thanks, I think when I take it to LAMOTTA ill bring them the sheet for the TSB and have them take a look at it.

tino

Afixer can you elaborate on the fix ... ?

Thanks

Dean Martin

Search TSB 06-4-1 for the Center Stack Rattle fix (that's the hose clamp one). Before the factory exhaust pipes Y together there is a hanger on each side through a rubber mount attached to the tranmission cross member. You put a 3" hose clamp around the entire exhaust pipe and over the bushing and tighten down...that's it.

TSB 05-8-6 is for 850 RPM vibration for 4.0 V6 w/ auto tranny.

Tungsten

That sounds like it could be my problem! I don't see this in the 2006 TSB list on this site..is there another site I should be checking?

Thanks,
Mike