thinkin about the vortech
#2
RE: thinkin about the vortech
ORIGINAL: Backlash
i kinda wanna go with this power adder....is the aftercooler worth it? and would it be ok to go with a one step smaller pulley?
i kinda wanna go with this power adder....is the aftercooler worth it? and would it be ok to go with a one step smaller pulley?
#3
RE: thinkin about the vortech
ORIGINAL: scrming
Yes, the aftercooler is worth it... The stock HO kit (aftercooler) comes with a 3.25" pulley and is rated at 10PSI... there are a few guys that have dropped down to the 2.87" pulley and have had no issues... I think the key which every way you go is to make sure you get a good custom dyno tune...
ORIGINAL: Backlash
i kinda wanna go with this power adder....is the aftercooler worth it? and would it be ok to go with a one step smaller pulley?
i kinda wanna go with this power adder....is the aftercooler worth it? and would it be ok to go with a one step smaller pulley?
#4
RE: thinkin about the vortech
ORIGINAL: scrming
Yes, the aftercooler is worth it... The stock HO kit (aftercooler) comes with a 3.25" pulley and is rated at 10PSI... there are a few guys that have dropped down to the 2.87" pulley and have had no issues... I think the key which every way you go is to make sure you get a good custom dyno tune...
ORIGINAL: Backlash
i kinda wanna go with this power adder....is the aftercooler worth it? and would it be ok to go with a one step smaller pulley?
i kinda wanna go with this power adder....is the aftercooler worth it? and would it be ok to go with a one step smaller pulley?
#5
RE: thinkin about the vortech
ORIGINAL: 8cd03gro
holy hell isn't that small of a pulley going to be pushing like 13 psi?!
ORIGINAL: scrming
Yes, the aftercooler is worth it... The stock HO kit (aftercooler) comes with a 3.25" pulley and is rated at 10PSI... there are a few guys that have dropped down to the 2.87" pulley and have had no issues... I think the key which every way you go is to make sure you get a good custom dyno tune...
ORIGINAL: Backlash
i kinda wanna go with this power adder....is the aftercooler worth it? and would it be ok to go with a one step smaller pulley?
i kinda wanna go with this power adder....is the aftercooler worth it? and would it be ok to go with a one step smaller pulley?
yep... 12 to 13... your looking at 320 to 330 RWHP...
Thread
Thread Starter
Forum
Replies
Last Post
tj@steeda
Steeda Autosports
0
09-16-2015 07:53 PM
Soldier GT
4.6L (1996-2004 Modular) Mustang
9
08-12-2015 03:46 PM