2005 Mustang v6 Cam?
#2
RE: 2005 Mustang v6 Cam?
https://mustangforums.com/m_3428624/tm.htm
Good info on this page, to up in the air right now on cams. No one makes a uncut cam.
Good info on this page, to up in the air right now on cams. No one makes a uncut cam.
#3
RE: 2005 Mustang v6 Cam?
Super six motorsports has a cam setup but they require their stage 3 heads because the cams are a regrind which makes this a lil pricy... I got this setup but havent installed it yet but you may see a very good increase in horsepower IO was told about 50 but noone really knows.
#4
RE: 2005 Mustang v6 Cam?
ORIGINAL: v6 muscle
Super six motorsports has a cam setup but they require their stage 3 heads because the cams are a regrind which makes this a lil pricy... I got this setup but havent installed it yet but you may see a very good increase in horsepower IO was told about 50 but noone really knows.
Super six motorsports has a cam setup but they require their stage 3 heads because the cams are a regrind which makes this a lil pricy... I got this setup but havent installed it yet but you may see a very good increase in horsepower IO was told about 50 but noone really knows.
I really wish someone did a blank cam for us.... Thanks for doing this.
#5
RE: 2005 Mustang v6 Cam?
A cam is always good for a few more pony's. Sounds good v6. Definately keep us posted on your progress.
You're gonna beef up the bottom end too right? Not really necessary just for a cambut if you got the bucks, I'd do it since you may plan on adding F/I anyway. Good to havethe extra beefthen for sure.
You're gonna beef up the bottom end too right? Not really necessary just for a cambut if you got the bucks, I'd do it since you may plan on adding F/I anyway. Good to havethe extra beefthen for sure.
Thread
Thread Starter
Forum
Replies
Last Post
Luke9222
4.6L General Discussion
19
10-22-2015 11:55 PM
junior04
4.6L (1996-2004 Modular) Mustang
1
09-28-2015 10:53 AM