samv1368

Hey guys ime thinking about going this route this summer as soon as possible, what do you think some gains would be for stage 2 ported cylinder heads, Fully ported intake and exhaust ports, complete bowl work,1.81/1.54 valves, 3-angle valve job, stock .48 lift springs from super six moter sports and their SSM Custom Reduced Base Circle SOHC Cams? Cause ime not turboing her for a while, due to parents, not a big deal just have to wait till i get into college!lol. Anything would help guys. thanks ahead of time!

Nsomnia

Heads and cam are where the N/A power is at in any engine, an engine needs to the most air possible to make the most power possible. Im not sure how their regrind works though.

chrisc

Look at SSM's website for the dyno of the stage 2 heads. Good deal if you can get a nice price on the install. I dunno about gains with cams...

samv1368

Ok well thanks guys for the input, ime looking for a shop that can do the install at a good price and a reasonable time!

The Potato

there's a Mustang shop on Highway 3 near the medical center, it's called PSI Motorsports. I would ask them about regrinding your cam

http://www.psimotorsportstx.com/

samv1368

Thanks the potato, i just emailed them!

samv1368

Well no reply from psi yet, ime cant wait to get the reply back! This would be the sickest mod, then ime doing the supersix cylinder heads when summer starts! Does anyone on here have a s197 that is cammed?

Trmachuno

Somebody that's charged had one for his car, but he doesn't come around much and may be changing his set-up. There are also 1 or 2other people naturally aspirated I heard with cams and heads but I don't think they log on much.

The Potato

who knows, I might even see you there sometime when I start modding

samv1368

Were are you from the potato if you dont mind me asking, ime from kingwood! I talked to my dad this afternoon and he said as long as i pay for it all up front that i can do it as soon as i get the money! And the cylinder heads will comenear the end of summer! But what exactly is the regrind cam? i researched it but couldnt really find anything?