header to pipe adapter?
#1
header to pipe adapter?
For those of you that have done this help would be greatly appreciated. So I have 2.5 o/r H pipe and am looking for an adapter for the 2.25 header to this H pipe. Does anyone know where to find this or am I going to have to weld it on?
#2
So the pipe from the header flange running back is the stock 2.25" (shorty headers?)
You can get 2.25-2.5" adapters, or, simply slide the 2.25 in the 2.5 and weld it around shut.
When I first did my dual exhaust a few years ago, I simply got some 2.25-2.5" adapters from the local auto parts store and those worked well.
You can get 2.25-2.5" adapters, or, simply slide the 2.25 in the 2.5 and weld it around shut.
When I first did my dual exhaust a few years ago, I simply got some 2.25-2.5" adapters from the local auto parts store and those worked well.
#3
So the pipe from the header flange running back is the stock 2.25" (shorty headers?)
You can get 2.25-2.5" adapters, or, simply slide the 2.25 in the 2.5 and weld it around shut.
When I first did my dual exhaust a few years ago, I simply got some 2.25-2.5" adapters from the local auto parts store and those worked well.
You can get 2.25-2.5" adapters, or, simply slide the 2.25 in the 2.5 and weld it around shut.
When I first did my dual exhaust a few years ago, I simply got some 2.25-2.5" adapters from the local auto parts store and those worked well.
Thread
Thread Starter
Forum
Replies
Last Post
junior04
4.6L (1996-2004 Modular) Mustang
1
09-28-2015 10:53 AM
tj@steeda
Steeda Autosports
0
09-24-2015 09:18 PM
trashxtrash
4.6L (1996-2004 Modular) Mustang
4
09-20-2015 10:49 PM