replacement bumpers (gt/gt500/cs)
#11
I just found this site....not saying it is the best deal around once you add $175 for shipping, plus you will have to get it painted.
http://www.bangastang.com/_e/Exterio...mper_07_09.htm
I recently purchased a Pypes X Pipe and GT(Auto) take-offs....I am inclined to have my stock bumper trimmed out to accomodate the driver side pipe. I see that most people that go this route seem happy....maybe they just don't want to spend the extra money, like I do not. We will see, if the cut out looks bad, then I will go back to what you are doing....looking for a good deal on a rear bumper of valance. Please post whatever you end up with.
http://www.bangastang.com/_e/Exterio...mper_07_09.htm
I recently purchased a Pypes X Pipe and GT(Auto) take-offs....I am inclined to have my stock bumper trimmed out to accomodate the driver side pipe. I see that most people that go this route seem happy....maybe they just don't want to spend the extra money, like I do not. We will see, if the cut out looks bad, then I will go back to what you are doing....looking for a good deal on a rear bumper of valance. Please post whatever you end up with.
#12
I have a dinged up front bumper and have found that it will be about the same cost to swap it for a GT takeoff as to repaint it. One thing to keep in mind is that the GT front bumper will require a GT grill also. If you get the full bumper-grill package from Newtakeoff ($375), you'll also need a wiring harnass and about half a day to hook up the lights. Another option would be to get just the bumper cover and then look around Ebay for a Bullitt grill. Those seem to run about $200, maybe less. So any way you look at it, you are going to be out about $400 plus shipping for the swap.
Thread
Thread Starter
Forum
Replies
Last Post