2011 V6 Cold Air & Tuner Package From Steeda
#1
2011 V6 Cold Air & Tuner Package From Steeda
Hi Guys and Girls,
Team Steeda has been working hard to create a powerful and proven cold air intake and tuner package for your 2011 V6 Mustang, and we are pleased to announce that we are a little less than 3 weeks from release. I wanted to give you just enough information to get your "wheels turning" so to speak.
Attached you will a dyno sheet showing horsepower gains before and after the install of the cold air intake. A little background on the test vehicle; this 2011 V6 Mustang was running 93 octane and had no other modifications other than the cold air intake and 93 octane tune.
The dyno sheet speaks for itself and the gains of over 20 rwhp and up to 30 ft/lbs of torque are pretty impressive!
The image of the CAI is a prototype and has since been revised slightly but you get the idea. Key features are our stainless steel heat shield, rubber seal to seal the airbox against the hood, and our velocity stack to increase air velocity and streamline airflow.
And as always, don't forget that our products are made in the USA. Thanks for supporting us!
Team Steeda has been working hard to create a powerful and proven cold air intake and tuner package for your 2011 V6 Mustang, and we are pleased to announce that we are a little less than 3 weeks from release. I wanted to give you just enough information to get your "wheels turning" so to speak.
Attached you will a dyno sheet showing horsepower gains before and after the install of the cold air intake. A little background on the test vehicle; this 2011 V6 Mustang was running 93 octane and had no other modifications other than the cold air intake and 93 octane tune.
The dyno sheet speaks for itself and the gains of over 20 rwhp and up to 30 ft/lbs of torque are pretty impressive!
The image of the CAI is a prototype and has since been revised slightly but you get the idea. Key features are our stainless steel heat shield, rubber seal to seal the airbox against the hood, and our velocity stack to increase air velocity and streamline airflow.
And as always, don't forget that our products are made in the USA. Thanks for supporting us!
#2
Where are you getting dains of "over 20hp"? I'm seeing 16.4 hp and 25.36 torque gains, not 30. Are you talking crank? If so why, when you have a dyno sheet showing rear wheel numbers? Not to knock your stuff, cause it looks good and the numbers are impressive, I'm just wondering why the discrepancy.
#3
Where are you getting dains of "over 20hp"? I'm seeing 16.4 hp and 25.36 torque gains, not 30. Are you talking crank? If so why, when you have a dyno sheet showing rear wheel numbers? Not to knock your stuff, cause it looks good and the numbers are impressive, I'm just wondering why the discrepancy.
#4
Hi Guys and Girls,
My apologies for the delay in updating you all on this package deal! Here is the official pricing information:
Steeda cold air intake 389.95 - product number 555-3159 - CLICK HERE
Power Pak will be 699.95 - product number 555-3938 (will be added to the website this week, please check back)
Wake your V6 up with this proven combination! Please let me know if you have any questions and I'll be glad to assist.
My apologies for the delay in updating you all on this package deal! Here is the official pricing information:
Steeda cold air intake 389.95 - product number 555-3159 - CLICK HERE
Power Pak will be 699.95 - product number 555-3938 (will be added to the website this week, please check back)
Wake your V6 up with this proven combination! Please let me know if you have any questions and I'll be glad to assist.
Thread
Thread Starter
Forum
Replies
Last Post
2011GTPremium
2005-2014 Mustangs
10
05-19-2010 02:46 PM