Pitchblack7720 |
06-20-2013 03:00 PM |
Well this is happening to me after I installed a new clutch with everything replaced like the flywheel, TOB... On WOT, shifting to any gear, it blocks me from going into gear into it drops passed 5 rpms... I already changed the master cylinder, clutch master cylinder, upgraded to ford racing clutch line, Prothane motor mounts... And i noticed if i rev around 4-5k in first with the clutch pressed all the way down, car moves forward a little. I feel like there is air that would not come out of the slave cylinder no matter how many times i bled it... What do ya'll think, im at this point stumped.
|