exhaust rattle
#1
exhaust rattle
I have a JBA dual exhaust kit that is a "bolt on" kit (meaning it isnt welded and the joints are simply slipped together with clamps holding them together).
Anyways, each morning for the past 6 years, while the car is cold, i get a buzzing sound coming from one of the clamps that isnt quite tight enough. I tried tightening it several times, but its to the point that I will break the clamp it i torque it any tighter.
Question, do they sell something to put between these slip-type joints on exhaust to reduce this type of thing?
Anyways, each morning for the past 6 years, while the car is cold, i get a buzzing sound coming from one of the clamps that isnt quite tight enough. I tried tightening it several times, but its to the point that I will break the clamp it i torque it any tighter.
Question, do they sell something to put between these slip-type joints on exhaust to reduce this type of thing?
#3
There is some material that is made for this...
It's some kind of mesh, it looks like a door screen material that wraps around the inner pipe but you'll need a gap big enough to get it in...
It's some kind of mesh, it looks like a door screen material that wraps around the inner pipe but you'll need a gap big enough to get it in...
#6
Try this then: WWW.knitmeshtechnologies.com
Go to their automotive page.
They have a franchise in AL...
Go to their automotive page.
They have a franchise in AL...
Thread
Thread Starter
Forum
Replies
Last Post
tj@steeda
Steeda Autosports
0
09-24-2015 09:18 PM