HOW TO: Program a 3rd Key Into PATS
03-26-2018, 03:31 PM
#1
Banned
Thread Starter
Join Date: Jan 2018
Location: Pennsylvania
Posts: 2,327
HOW TO: Program a 3rd Key Into PATS
Must already have two valid keys.
1. Put 1st valid key in, turn to run, wait for dash lights to go out, turn off, remove key.
2. Put 2nd valid key in, turn to run, wait for dash lights to go out, turn off, remove key.
3. Put key to be programmed into the car in, turn on, wait for dash lights to go out, start.
I verified this today with a 3rd key, and it worked. I now have three keys for my '08, and
plan to use on for the remote starter.
1. Put 1st valid key in, turn to run, wait for dash lights to go out, turn off, remove key.
2. Put 2nd valid key in, turn to run, wait for dash lights to go out, turn off, remove key.
3. Put key to be programmed into the car in, turn on, wait for dash lights to go out, start.
I verified this today with a 3rd key, and it worked. I now have three keys for my '08, and
plan to use on for the remote starter.
Thread
Thread Starter
Forum
Replies
Last Post
Tylus
2005-2014 Mustangs
2
01-16-2010 05:08 PM