Crankshaft Pulley and HB - Page 2 - MustangForums.com



V6 S197 General Discussion This section is for technical discussions pertaining specifically to the V6 variation of the 2005 and newer Ford Mustang.

Reply
 
 
 
Thread Tools Search this Thread
Old 06-18-2018, 08:13 PM   #11  
LordRipberger
3rd Gear Member
Thread Starter
 
LordRipberger's Avatar
 
Join Date: Aug 2009
Location: Purdue University Alum in Indy
Posts: 735
Default

Quote:
Originally Posted by JimC View Post
Threads merged. As '08MustangDude said, don't post the same thing in multiple locations.
It was two separate topics. One was about steps (how too) and the other was about a part review.
LordRipberger is offline   Reply With Quote
Old 06-19-2018, 04:33 PM   #12  
08'MustangDude
3rd Gear Member
 
Join Date: Jan 2018
Location: Pennsylvania
Posts: 872
Default

Quote:
Originally Posted by LordRipberger View Post
It was two separate topics. One was about steps (how too) and the other was about a part review.
Here were your posts:
Quote:
Originally Posted by LordRipberger on 06-14-2018, 02:05 PM View Post
Hey Guys,

I need to replace my pulley or HB. I am not really sure. The pulley is wobbling and makes small chirps until the engine warms up. Which based on my research is a sign that is the issue. I have questions and concerns.

2006 Mustang V6 - 140K+ miles - never changed as far as I know.

1 - Is the crankshaft pulley and the HB together? Do you replace them and buy a new part as one?

2 - Ways to break the bolt without having to dismantle the front end.

3 - Do I need to replace the bolt or can I use the original with the new pulley?

4 - How do I secure the new pulley on? I assume since i need a tool to get it off more then tightening the bolt is needed to get it on.

5 - Any special steps for getting the key to line up (never done it before, just see in the pictures it has a space for it

6 - Any greasing/oils/etc. needed?

7 - tid-bits or suggestions?

Thanks guys.
Quote:
Originally Posted by LordRipberger on 6-18-18, 06:28 AM View Post
Hey Guys,

I was going to buy a new crankshaft pulley/HB. When I got onto Rock Auto, there were several selections, but I have a concern. They all seems to have a different size gear (thickness and length) on each one. I was thinking the biggest one would be best but it has warranty of only 12 months while the smallest gear has a lifetime.

Here is the list:
https://www.rockauto.com/en/catalog/...+balancer,5512

Ultra-Power Brand: Cheapest, 12 month warranty, but the images don't look like there is much cuchioning for the HB.

ATP Brand: Close in cost, limited lifetime warranty, looks to be the best quality, but gear is the smallest.

Thanks for your opinions.
NO, they were both about you wanting/needing to replace your HB/Crank pulley...
08'MustangDude is online now   Reply With Quote
Old 06-20-2018, 05:07 AM   #13  
LordRipberger
3rd Gear Member
Thread Starter
 
LordRipberger's Avatar
 
Join Date: Aug 2009
Location: Purdue University Alum in Indy
Posts: 735
Default

Quote:
Originally Posted by 08'MustangDude View Post
Here were your posts:




NO, they were both about you wanting/needing to replace your HB/Crank pulley...

With that logic most topics should be combined....I need to work on my mustang. The reason for both threads might have been the same, but one thread was in a different forum asking how to do a task. The other was in a separate forum asking for general opinions about a part review. And I posted this in a separate location to try to get more exposure as no one was answering the questions besides google it. Which I already did and had questions.
LordRipberger is offline   Reply With Quote
Old 06-20-2018, 05:36 AM   #14  
08'MustangDude
3rd Gear Member
 
Join Date: Jan 2018
Location: Pennsylvania
Posts: 872
Default

Whatever, like reasoning with a collapsed star....
08'MustangDude is online now   Reply With Quote
Old 06-20-2018, 01:47 PM   #15  
Derf00
6th Gear Member
 
Join Date: Feb 2005
Location: AZ
Posts: 11,166
Default

Before deciding on whether or not to reuse a HB bolt you need to know if it's a torque to yield bolt or one that is simply torqued into place. Torque to yield bolts tend to stretch and deform when tightend to spec.

The most easy way to tell if is if it has a single torque spec or a two st/stagep torque spec.

Single torque spec generally indicates a reusable bolt. Two-step/stage torque spec is a torque-to-yield and should be replaced anytime it is removed.

Two step is where it says Torque to xxx ft/lbs, then torque to xxx ft/lbs (or turn x # of degrees)
Derf00 is offline   Reply With Quote
 
 
Reply

Related Topics
Thread Thread Starter Forum Replies Last Post
Is the crankshaft pulley and harmonic balancer all one assembly? HamMach1 4.6L (1996-2004 Modular) Mustang 2 06-09-2017 05:01 PM
underdrive crankshaft pulley vs underdrive pulley 03rumbler 4.6L General Discussion 4 08-01-2009 06:27 PM
Oil on crankshaft pulley? devinsteen General Tech 6 06-02-2005 04:28 PM
New 05 Mustang with a Rusty Crankshaft Pulley Wheel??? RiceRocketToMustang 2005-2014 Mustangs 16 04-05-2005 11:09 AM
Crankshaft Pulley Required zak7711 5.0L (1979-1995) Mustang 5 02-01-2004 12:01 AM


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump

Advertising
Featured Sponsors
Vendor Directory

All times are GMT -5. The time now is 04:28 PM.


We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.