Need help finishing my project up.
#1
Need help finishing my project up.
Hi I am kinda of a newbie to this forum, but I am trying to reach out for some help. I was kinda of doing a V8 conversion into my 4 cyl mustang, I am almost done have some little things left to do, I live in Southern California in the Riverside/Temecula Area, if anyone is down to come help me finish the car that would be great.
All that is left to do is;
Hook up Tach
Run Transmission Lines, and cooler
Install shifter and cables to C4 trans.
Install Throttle cable to carb
Fab up my trans. cross member to fit the C4
Thats pretty much it. Those are things I can do but I am not very good at these things so if someone is good at this PM so we can arrange something. I don't trust myself. The person that was helping me with the project has other priorities lined up so I just need to get the car going.
I already started the car, oil pressure is good and everything. I started for about 2-4 mins. So the next time I start it I need to break in the cam. Thats pretty much it.
Shoot me a PM who ever is down to help out. Pizza, beer will be provided or if someone has set fees lmk as well.
All that is left to do is;
Hook up Tach
Run Transmission Lines, and cooler
Install shifter and cables to C4 trans.
Install Throttle cable to carb
Fab up my trans. cross member to fit the C4
Thats pretty much it. Those are things I can do but I am not very good at these things so if someone is good at this PM so we can arrange something. I don't trust myself. The person that was helping me with the project has other priorities lined up so I just need to get the car going.
I already started the car, oil pressure is good and everything. I started for about 2-4 mins. So the next time I start it I need to break in the cam. Thats pretty much it.
Shoot me a PM who ever is down to help out. Pizza, beer will be provided or if someone has set fees lmk as well.
Thread
Thread Starter
Forum
Replies
Last Post
Matt's 95 Stang
5.0L (1979-1995) Mustang
2
10-05-2015 07:16 AM
KingRando
2005-2014 Mustangs
5
10-02-2015 08:06 AM