Wheel diamter between front and rear
#1
Wheel diameter between front and rear
is there a percentage that you have to be within when comparing the wheel diamter between the front and the rear? Just so I dont throw off the ABS and traction control but I guess it depends on certain cars
Last edited by coffeebowl; 07-17-2018 at 08:48 PM. Reason: Spell check
#2
I've heard 3%, and to be picky I think that's 3% on tire revs/mile which probably differs a little from 3% on tire diameter.
I imagine it has to be at least that much in order to work properly with cars where two of the tires are at full tread depth and the other two are well into the wear bars.
Norm
I imagine it has to be at least that much in order to work properly with cars where two of the tires are at full tread depth and the other two are well into the wear bars.
Norm
Last edited by Norm Peterson; 07-23-2018 at 06:41 AM.
#3
You could use the fatter ones in back, narrower in front, ABS remains unaffected.
It's easy enough to calculate, if you ask I'll show how I do it. imp
Thread
Thread Starter
Forum
Replies
Last Post
Boostin S281
Saleen, Roush and Boss Mustangs
14
11-08-2007 08:58 AM