Share

October 3, 2009

4)Housing1 Not shown is cutting and removing factor lens which was done with a Dremel. Also cut the adhesive holding the vent trim so it can be removed. Shows modified reflector reinstalled into housing. Reflector can be cut without removing from the housing and mounting posts with appropriate Dremel cutting tips. I did one headlight by removing the reflector and the second one I cut in-place.

Comments (0)

Please Register or log in to leave a comment.

Be the first to comment on this picture!

  • More About This Picture

  •  
  • Vehicle

    N/A

  • Location

    N/A

  • Keywords

    N/A

Discover More Pictures

See More