What's hanging from your rearview mirror?
#31
http://www.ebay.com/itm/NHL-Boston-B...-/160728572148
#32
U need a lil bratz Bruins hockey player keychain. =-)
http://www.ebay.com/itm/NHL-Boston-B...-/160728572148
http://www.ebay.com/itm/NHL-Boston-B...-/160728572148
#34
There are 4 posts on the back of the emblem I broke the 2 on the sides off with needlenose plyers i went ahead and put the leather skin on measured and centered where I wanted the emblem on the headrest then i pushed down firmly to mark the leather where the posts are. removed the emblem and poked very small holes for the posts in the leather with a gouging tool that came with my screwdriver set. then I took an old Nintendo game case the old school ones and cut it into a rectangle just a little smaller than the the tribar part of the emblem. I took the emblem and pushed down on the plastic to mark it then took the gouging tool and poked very tiny holes through the plastic you want to make sure the holes are smaller than the post on the emblem so when you slide the plastic onto the post it will have to expand a little so it will grip tightly around the post. I then placed the emblem on the headrest pushed the posts through the tiny holes in the leather and then from the inside of the headrest skin attached the plastic tabs I made pushing then flush against the inside lining of the skin. I put two tabs on each headrest to be on the safe side. clipped the fastener at the bottom of the headrest and reattached the headrest to the seat. It sounds a little complicated but it was actually easy to do and the emblems are on there tight dont have to worry about them falling off.
#40