Which driveshaft to buy?
#1
Which driveshaft to buy?
1) http://cgi.ebay.com/ebaymotors/DSS-H...item5adc282d14
Yes I know how some people think about buying from ebay, but it's the cheapest I can find. However, I'm not willing to sacrifice quality for price
2) http://www.suttonhp.com/store/item.a...ARTMENT_ID=125
Didn't hear a lot of good reviews about it
3) http://powerhouse411.com/catalog/ind...products_id=27
Last one, if you got more you like please link, I'd appreciate it.
Thanks for your advice.
Yes I know how some people think about buying from ebay, but it's the cheapest I can find. However, I'm not willing to sacrifice quality for price
2) http://www.suttonhp.com/store/item.a...ARTMENT_ID=125
Didn't hear a lot of good reviews about it
3) http://powerhouse411.com/catalog/ind...products_id=27
Last one, if you got more you like please link, I'd appreciate it.
Thanks for your advice.
#2
I'm sure some will post that have direct feedback but I have seen several good reviews on the below from the mustang forums.
http://www.axle-exchange.com/
http://www.axle-exchange.com/
#3
PST
Not the cheapest but the least likely to have vibration problems which is so common with all the other designs. The double universal joint requires precise alignment and if the splines loosen up you'll have vibration. Neither of those things are an issue with the PST for the Mustang. No splines used and only one universal joint the other end has a CV joint which eliminates both problems.
Not the cheapest but the least likely to have vibration problems which is so common with all the other designs. The double universal joint requires precise alignment and if the splines loosen up you'll have vibration. Neither of those things are an issue with the PST for the Mustang. No splines used and only one universal joint the other end has a CV joint which eliminates both problems.
#4
#7
Last edited by Joenpb; 05-19-2011 at 01:11 AM.
#8
http://www.brenspeed.com/dshaft05gt.html
That is what I have. It is rated to 900hp so no worries about that. Some of them are only rated to 600 or so. I am planning on putting on the eforce stage 1 from brenspeed which is rated at 560 bhp so I didn't want to chance it.
It is super easy to install, and I have no vibration problems.
That is what I have. It is rated to 900hp so no worries about that. Some of them are only rated to 600 or so. I am planning on putting on the eforce stage 1 from brenspeed which is rated at 560 bhp so I didn't want to chance it.
It is super easy to install, and I have no vibration problems.
#10
Thanks for the info guys, I didn't know about shaftmasters. I'm starting to lean more towards them as I've heard good things about them as mentioned above.
If I go with the direct bolt-in for easy install, anything wrong with that?
If I go with the direct bolt-in for easy install, anything wrong with that?