maniac__

Hi, nice how-to.
I have a gt/cs 2013 with shaker pro, they put a 10inches sub in the trunk.
I remove-it to change-it, after the box was remove i found the amp right there behind the sub box !. the sub box stamp by Pioneer.
i will take picture this weekend, im trying to find the pinout of the plug and also if there is a plug instead of splicing that i can use.
I know that i can use the high output, amp as high input but i prefer the low.

JDWalton

Look at the manual on page 1. If you look at the back side of the plug ypu should be able to figure the pin out by the color going in.

maniac__

thanks, i will look at the manual.

Patrick Paget

maniac, did u find which wire. id like to pull that 10 out and add my 2 10 inch woofers. Just need the audio source wire from amp, ill run my own amp

maniac__

Hi i will take some picture this afternoon.

maniac__

Here is the pic.

Patrick Paget

thank maniac,

Ill try those two wires. You going to put in an external amp and speakers too?
Let me know your results.

maniac__

You welcome.
Yes i will put an external amp and speakers.

JDWalton

thx for getting that up. I havent been on an actualy PC in a week or so... busy with work and out of town.

Patrick Paget

Let me know how it goes. Looking to do the same, and we have the same cars.
2013 c/s shaker 1000 sterling gray