Notices
2010-current S197 Appearance Section For all appearance mods to the 2010-2014 S197's

2011 GT Sterling Grey with Drag DR-37

Thread Tools
 
Search this Thread
 
Old 07-29-2011, 07:56 PM
  #1  
j_marinelli
Thread Starter
 
j_marinelli's Avatar
 
Join Date: Jan 2011
Location: Texas
Posts: 30
Default 2011 GT Sterling Grey with Drag DR-37

After much debate as to what to go with, I ended up going with the Drags. Ended up going with 9.5" all around on Hankook 275/40s. Not the best pictures but will try and get better ones in the near future.





Before:






After:




Im not to crazy about the lugs or the caps. Lugs will get changed to black and not sure what to do with center caps just yet.
j_marinelli is offline  
Old 07-29-2011, 08:58 PM
  #2  
stepqhen
1st Gear Member
 
stepqhen's Avatar
 
Join Date: Feb 2011
Location: Maryland
Posts: 80
Default

I am looking forward to those pictures as this is exactly what I have been planning on doing. I use the DR37s in the satin silver finish in 19x8.5 for my auto-x wheels, but was wanting the 9.5 for the street.
stepqhen is offline  
Old 07-29-2011, 10:35 PM
  #3  
05xrunner
4th Gear Member
 
05xrunner's Avatar
 
Join Date: May 2010
Location: PA
Posts: 1,269
Default

paint those caps..that was the first thing I did as soon as my wheels showed up
05xrunner is offline  
Old 07-29-2011, 11:04 PM
  #4  
Grungie
1st Gear Member
 
Grungie's Avatar
 
Join Date: Feb 2011
Location: Florida
Posts: 105
Default

Looks good! I'm so torn between these and the gt500 wheels!
Grungie is offline  
Old 07-30-2011, 04:24 AM
  #5  
j_marinelli
Thread Starter
 
j_marinelli's Avatar
 
Join Date: Jan 2011
Location: Texas
Posts: 30
Default

Originally Posted by 05xrunner
paint those caps..that was the first thing I did as soon as my wheels showed up
What paint did you use on them if you dont mind me asking?
j_marinelli is offline  
Old 07-30-2011, 12:00 PM
  #6  
stepqhen
1st Gear Member
 
stepqhen's Avatar
 
Join Date: Feb 2011
Location: Maryland
Posts: 80
Default

Which offset is that? 40mm or 20mm?
stepqhen is offline  
Old 07-30-2011, 02:08 PM
  #7  
j_marinelli
Thread Starter
 
j_marinelli's Avatar
 
Join Date: Jan 2011
Location: Texas
Posts: 30
Default

Originally Posted by stepqhen
Which offset is that? 40mm or 20mm?
They are a 40mm

20mm would stick out to much. Its alot different then what Im use to. Coming from a G35 where ppl would run offsets into the negitives
j_marinelli is offline  
Old 07-30-2011, 09:48 PM
  #8  
DESERTEAGLE50
1st Gear Member
 
DESERTEAGLE50's Avatar
 
Join Date: Nov 2010
Location: THE GUNSHINE STATE
Posts: 127
Default

looks good ...now a little drop!?
DESERTEAGLE50 is offline  
Old 07-30-2011, 10:02 PM
  #9  
05xrunner
4th Gear Member
 
05xrunner's Avatar
 
Join Date: May 2010
Location: PA
Posts: 1,269
Default

i just used some regular satin black paint. I put 3 coats on it..hasnt chipped or anything yet
05xrunner is offline  
Old 07-31-2011, 06:43 AM
  #10  
j_marinelli
Thread Starter
 
j_marinelli's Avatar
 
Join Date: Jan 2011
Location: Texas
Posts: 30
Default

Originally Posted by DESERTEAGLE50
looks good ...now a little drop!?
I know I do. This one will take time to get the wife approval. Last car was lowered and the wife didnt like it because I could go over speed bumps, railroad tracks, etc... Granted it was lowered over 3" but wife still considers lower all the same


Originally Posted by 05xrunner
i just used some regular satin black paint. I put 3 coats on it..hasnt chipped or anything yet
I came across this at autozone I think I might try. Its only6 for a can.

http://www.autozone.com/autozone/acc...er=539687_0_0_
j_marinelli is offline  


Quick Reply: 2011 GT Sterling Grey with Drag DR-37



All times are GMT -5. The time now is 11:52 AM.