The home-made MIL's work! *pics*
1st Gear Member
Joined: Aug 2006
Posts: 65
From: Springdale, AR
RE: The home-made MIL's work! *pics*
Can you post the wiring diagram and some instructions? I plan on doing my exhaust and tune the "right" way in the future. But, for now, I'll take the challenge and be ghetto about it. Thanks
5th Gear Member
Joined: Jul 2004
Posts: 3,062
From: Pittsburgh/Dayton
RE: The home-made MIL's work! *pics*
Not positive but have you checked the voltage/current running through there. The resistors you have are 1/4 watt which is not very much. If your coming close to 20mA which i wouldnt doubt the resistor could burn. For something I built with LED's i'm using a 15watt resistor pulling about 800mA. I know youll be pulling much less than that, but those 1/4 watt resistors are very weak.
Just something to check if it fails.
Just realized, 1megaohm, you could probably just leave that as an open circuit. 1 megaohm is almost like infinite resistance in that sense.
Just something to check if it fails.
Just realized, 1megaohm, you could probably just leave that as an open circuit. 1 megaohm is almost like infinite resistance in that sense.
6th Gear Member
Joined: May 2006
Posts: 6,448
From: Ohio
RE: The home-made MIL's work! *pics*
ORIGINAL: czwalga00gt
Not positive but have you checked the voltage/current running through there. The resistors you have are 1/4 watt which is not very much. If your coming close to 20mA which i wouldnt doubt the resistor could burn. For something I built with LED's i'm using a 15watt resistor pulling about 800mA. I know youll be pulling much less than that, but those 1/4 watt resistors are very weak.
Just something to check if it fails.
Just realized, 1megaohm, you could probably just leave that as an open circuit. 1 megaohm is almost like infinite resistance in that sense.
Not positive but have you checked the voltage/current running through there. The resistors you have are 1/4 watt which is not very much. If your coming close to 20mA which i wouldnt doubt the resistor could burn. For something I built with LED's i'm using a 15watt resistor pulling about 800mA. I know youll be pulling much less than that, but those 1/4 watt resistors are very weak.
Just something to check if it fails.
Just realized, 1megaohm, you could probably just leave that as an open circuit. 1 megaohm is almost like infinite resistance in that sense.
is my username.
Joined: May 2006
Posts: 13,808
From: Earth
RE: The home-made MIL's work! *pics*
Thats awesome dude. Hell yeah nice work.
Not to jack the thread, but does anyone know if the timing changes when the CEL turns on because of the no-cats O2 censors?
Not to jack the thread, but does anyone know if the timing changes when the CEL turns on because of the no-cats O2 censors?
Thread Starter
5th Gear Member
Joined: Jan 2006
Posts: 2,504
RE: The home-made MIL's work! *pics*
some people say the car goes into limp mode and the car runs like *** but i've been driving around for a few months with the CEL on and i didn't really feel a difference.