built 302 engine and t-5 tranny combo complete
#1
built 302 engine and t-5 tranny combo complete
complete motor, carb to oil pan, with T-5 trans. $3800 o.b.o.
i wil seperate the tranny package from the motor.
motor price complete $2300
tranny package complet with bell,flywheel,clutch and pressure plate $1500
heres whats included with the motor:
absolutely everything listed below has less then 500 miles on it.it is all new including the shortblock.
92 roller block stock crank,stock rods,forged flat top pistons.
trick flow main girdle with ARP main studs
all ARP hardware top to bottom,
trick flow tristwed wedge heads
svo 1.6 roller rockers
comp hardened push rods
K-Motion K-800 valvesprings, titanium retainers.
Camshaft Innovations custom cam
parker funnel web intake
AED custom 650 cfm carb
moroso 7 qt oil pan
pro products balancer
new oem water pump
svo double roller timing chain.
polished aluminum valve covers
msd distributor
ford motorsport plug wires
the trans is a built T-5 with all the g-force internals.it is not faceplated. it is the helical cut synchronized set-up.should be good for 550+ hp.
new King Cobra clutch kit,
and pro 5.0 shifter.
factory stock flywheel
pro 5.0 shifter.
this combination will easily run deep in the 11's. and has a 6800 rpm shift point.it is setup to run N/A but it'll easily run in the low 10's with a small 100 shot.
please email for pics. the motor is still in the car and running for anyone wanting to see it run first.
i'm located in south beloit illinois about an hour west of chicago and an hour south of madison wisconsin.
i will be happy to meet someone part way for a small feee or i can ship it as well.
any questions please call me at 608-346-4015 or email me at bandbracing@sbcglobal.net thank you ,John
i wil seperate the tranny package from the motor.
motor price complete $2300
tranny package complet with bell,flywheel,clutch and pressure plate $1500
heres whats included with the motor:
absolutely everything listed below has less then 500 miles on it.it is all new including the shortblock.
92 roller block stock crank,stock rods,forged flat top pistons.
trick flow main girdle with ARP main studs
all ARP hardware top to bottom,
trick flow tristwed wedge heads
svo 1.6 roller rockers
comp hardened push rods
K-Motion K-800 valvesprings, titanium retainers.
Camshaft Innovations custom cam
parker funnel web intake
AED custom 650 cfm carb
moroso 7 qt oil pan
pro products balancer
new oem water pump
svo double roller timing chain.
polished aluminum valve covers
msd distributor
ford motorsport plug wires
the trans is a built T-5 with all the g-force internals.it is not faceplated. it is the helical cut synchronized set-up.should be good for 550+ hp.
new King Cobra clutch kit,
and pro 5.0 shifter.
factory stock flywheel
pro 5.0 shifter.
this combination will easily run deep in the 11's. and has a 6800 rpm shift point.it is setup to run N/A but it'll easily run in the low 10's with a small 100 shot.
please email for pics. the motor is still in the car and running for anyone wanting to see it run first.
i'm located in south beloit illinois about an hour west of chicago and an hour south of madison wisconsin.
i will be happy to meet someone part way for a small feee or i can ship it as well.
any questions please call me at 608-346-4015 or email me at bandbracing@sbcglobal.net thank you ,John
#6
RE: built 302 engine and t-5 tranny combo complete
hey i am interested in the engine are you willing to seperate ? and how much for the motor thanx jeremy_gatchell@yahoo.com
#7
RE: built 302 engine and t-5 tranny combo complete
yes i would seperate the motor for $2300.
that will include everything from the carb to the oilpan, except the alternator and alternator brackets. i will however throw in the red throttle cable brackets and the red fuel pressure reg. bracket with the regulator and braided lines to the carb.
let me know thanks,John
that will include everything from the carb to the oilpan, except the alternator and alternator brackets. i will however throw in the red throttle cable brackets and the red fuel pressure reg. bracket with the regulator and braided lines to the carb.
let me know thanks,John
#9
RE: built 302 engine and t-5 tranny combo complete
no coil,no ignition box and no headers for that price. and the reason i'm not including these parts as they are not part of the motor. i'm including the motor from carb to oil pan for $2300 and i think thats a very fair price for a 425 hp motor. where else can you find a complete 425 hp motor thats virtually new for that kind of money?
keith craft racing offers a 306 with only 375 hp for $5475 thats 3100 more dollars for less hp.
they offer a $450 hp 347 for $6475 and 4100 more then mine for only an additonal 25 more hp.
the cheapest place i can find a complete crate engine most everything i'm including is coast high performance. they have a 347 with 420hp for $6100, they also offer longblocks for a little less for around $5100 and they don't include, an intake, carb,rockers,cam,pushrods,oil pan,distributor,plugs,wires. all they come with is a shortblock and cylinder heads.
$2300 is a smokin deal. if you want those other parts i'd be happy to sell them at an additional cost.
keith craft racing offers a 306 with only 375 hp for $5475 thats 3100 more dollars for less hp.
they offer a $450 hp 347 for $6475 and 4100 more then mine for only an additonal 25 more hp.
the cheapest place i can find a complete crate engine most everything i'm including is coast high performance. they have a 347 with 420hp for $6100, they also offer longblocks for a little less for around $5100 and they don't include, an intake, carb,rockers,cam,pushrods,oil pan,distributor,plugs,wires. all they come with is a shortblock and cylinder heads.
$2300 is a smokin deal. if you want those other parts i'd be happy to sell them at an additional cost.