4.6L (1996-2004 Modular) Mustang Technical discussions on 1996-2004 4.6 Liter Modular Motors (2V and 4V) within.

Where does this go???????

Thread Tools
 
Search this Thread
 
Old 07-20-2009, 09:46 AM
  #1  
Turbodude06
Thread Starter
 
Turbodude06's Avatar
 
Join Date: Jul 2009
Location: Georgia
Posts: 14
Default Where does this go???????

I found this picture online, but on my mustang the red line thats circled in yellow were is it supposed to go cause mine goes into the firewall??? But the one that runs into the firewall looks like the same line in this pic thats runnin right behind throttle body right next to that chrome circle thing lol, I'm trying to figure out were my vacuum leak is and I'm thinking this may be it.....

Turbodude06 is offline  
Old 07-20-2009, 09:51 AM
  #2  
Turbodude06
Thread Starter
 
Turbodude06's Avatar
 
Join Date: Jul 2009
Location: Georgia
Posts: 14
Default

here I circled it that line on my car runs into the firewall which doesn't make any sense cause its coming out of the intake man. I tried to pull it out but I didn't want to break it....

Turbodude06 is offline  
Old 07-20-2009, 10:38 AM
  #3  
Frostbitten
4th Gear Member
 
Frostbitten's Avatar
 
Join Date: Jul 2006
Location:
Posts: 1,495
Default

its supposed to go into the firewall for the a/c
Frostbitten is offline  
Old 07-20-2009, 11:09 AM
  #4  
Turbodude06
Thread Starter
 
Turbodude06's Avatar
 
Join Date: Jul 2009
Location: Georgia
Posts: 14
Default

Originally Posted by Frostbitten
its supposed to go into the firewall for the a/c
oh ok well the line that I circled that runs behind the throttle body where does that go cause mine doesn't have that....
Turbodude06 is offline  
Old 07-20-2009, 12:52 PM
  #5  
grogan
3rd Gear Member
 
grogan's Avatar
 
Join Date: Mar 2008
Location: maryland
Posts: 811
Default

are u sure the vacuum leak isnt coming from the manifold? thats where my problem was.
grogan is offline  
Old 07-20-2009, 07:18 PM
  #6  
Turbodude06
Thread Starter
 
Turbodude06's Avatar
 
Join Date: Jul 2009
Location: Georgia
Posts: 14
Default

idk i dont have any extra lines and i only see one place on the back of the manifold for a vacuum line and it has a line goin to it...
Turbodude06 is offline  
Old 07-20-2009, 11:38 PM
  #7  
1999mustang2000
5th Gear Member
 
1999mustang2000's Avatar
 
Join Date: Jan 2008
Location: HENDO,KY
Posts: 2,583
Default

my intake was also leaking....the holes was stripped out and the plenum was jus basically sittin on top and you could wiggle it
1999mustang2000 is offline  
Old 07-21-2009, 07:42 AM
  #8  
Turbodude06
Thread Starter
 
Turbodude06's Avatar
 
Join Date: Jul 2009
Location: Georgia
Posts: 14
Default

Originally Posted by 1999mustang2000
my intake was also leaking....the holes was stripped out and the plenum was jus basically sittin on top and you could wiggle it
well thats not good, mines bolted down just fine lol.....
Turbodude06 is offline  




All times are GMT -5. The time now is 02:37 PM.