96-98 PI Head/Intake/Cam swap?
#72
RE: 96-98 PI Head/Intake/Cam swap?
ORIGINAL: 98MustangSTL
Would it be a good idea to replace the valves, valve springs, pushrods, and lifters; while having the heads off?
Would it be a good idea to replace the valves, valve springs, pushrods, and lifters; while having the heads off?
#74
RE: 96-98 PI Head/Intake/Cam swap?
Yes.
Swapping in a PI motor is a good idea for a high mileage motor. Or, if you live where it gets VERY cold... the higher compression makes it a bish and a half to start in the cold.
Swapping in a PI motor is a good idea for a high mileage motor. Or, if you live where it gets VERY cold... the higher compression makes it a bish and a half to start in the cold.
#75
RE: 96-98 PI Head/Intake/Cam swap?
ORIGINAL: Acer2428
Yes.
Swapping in a PI motor is a good idea for a high mileage motor. Or, if you live where it gets VERY cold... the higher compression makes it a bish and a half to start in the cold.
Yes.
Swapping in a PI motor is a good idea for a high mileage motor. Or, if you live where it gets VERY cold... the higher compression makes it a bish and a half to start in the cold.
no ****. ever since i put the mach block in and skyrocketed my compression, car is tough to start sometimes and shaky until it warms up.
#77
RE: 96-98 PI Head/Intake/Cam swap?
ORIGINAL: 96 green gt
i have a 96 gt and i have 2001 gt motor that i can use for parts will the heads fit with no problems besides valve covers.??
i have a 96 gt and i have 2001 gt motor that i can use for parts will the heads fit with no problems besides valve covers.??
#78
RE: 96-98 PI Head/Intake/Cam swap?
thanks i checked and mine has 11 and the 01 has 14 bolts on the heads so i just am going to have to use the 01 valve covers.
i aslo was checking into a 96 cobra should i go with the cobra or swap the heads and do a couple cheap mods???
i aslo was checking into a 96 cobra should i go with the cobra or swap the heads and do a couple cheap mods???
#79
RE: 96-98 PI Head/Intake/Cam swap?
I'm sorry new member here I am going to but in a little. a p.i. head conversion cost about 1,000 dollars for me. you just got to know where to look. I got my heads from summit racing for 344 each and the intake from livernois for 160 then went to ford and got the heater hose for 21 bucks plus the nipple cost me another 10 bucks. but I am currently rebuilding my motorso the swap has been easy since the motor is out but I keep coming accross this fourm this post and decided to butt in a little later.
#80
RE: 96-98 PI Head/Intake/Cam swap?
i have the engine pulled out of my 96 gt. i am not sure what i should do. i considered the pi head swap or just getting a newer gt engine. is the pi swap worth the money? or should i replace the engine with a newer one? my engine had 64,000 miles on it when i removed it. is there a complete pi conversion kit out there? if so anyone have the part # for the kit and where i could buy it. thanks