Manual transmissions, T45, T5, 3650, T-56 ETC
11-14-2005, 04:26 PM
#41
6th Gear Member
Join Date: Jan 2004
Location: United States
Posts: 12,575
RE: TECH: Manual transmissions, T45, T5, 3650, T-56 ETC
ORIGINAL: Lasered01
According to my Haynes Manual...
1996 - 1997 V8 models have T45
1998 - 2000 V8 models have T50D
2001 to 2004 GT Models have the TR3650
There you go!
According to my Haynes Manual...
1996 - 1997 V8 models have T45
1998 - 2000 V8 models have T50D
2001 to 2004 GT Models have the TR3650
There you go!
11-14-2005, 05:35 PM
#42
5th Gear Member
Join Date: Aug 2005
Location: Whitehall, Michigan
Posts: 2,638
RE: TECH: Manual transmissions, T45, T5, 3650, T-56 ETC
T5 OD for OverDrive.
I thought the T45 went from 96-mid 01. Hell, I don't remember though.
And I don't trust my haynes manual, it's GARBAGE.
I thought the T45 went from 96-mid 01. Hell, I don't remember though.
And I don't trust my haynes manual, it's GARBAGE.
12-02-2005, 12:21 PM
#43
2nd Gear Member
Join Date: Nov 2005
Location: Ontario, Canada
Posts: 192
RE: TECH: Manual transmissions, T45, T5, 3650, T-56 ETC
Okay, so I have heard the TR3650 has some pretty big problems with the synchros...and I am aware there are TSBs out on it...has anyone gone to a Ford dealership to have the TSB done on their car? Did they hassle you when you said you wanted it done? How long was the repair? Is it completely free? For how long are the TSBs in effect?
12-02-2005, 06:34 PM
#44
3rd Gear Member
Join Date: Sep 2005
Location:
Posts: 554
RE: TECH: Manual transmissions, T45, T5, 3650, T-56 ETC
i changed the oil with full synth and added a short shifter on my 3650 witch used to take 5 min to warm up and shift better, it used to grind once in a while, but i noticed if i shifted more stronger and faster it never grinded, but when i changed the oil and added the steeda shifter is never grinds no matter what, these trannys need oil changed every 20-30k or your asking for introuble.....
12-26-2005, 03:17 PM
#46
Join Date: Dec 2005
Location:
Posts: 5
RE: TECH: Manual transmissions, T45, T5, 3650, T-56 ETC
Borg Warner T-56 dodge viper transmission. I am getting one in about a week i have herd they are bullet proof and a 50% overdrive what can be better. Low RPM's on the highway savin gas 
12-28-2005, 02:42 AM
#49
2nd Gear Member
Join Date: Feb 2005
Location:
Posts: 412
RE: TECH: Manual transmissions, T45, T5, 3650, T-56 ETC
I was going to go the same route (ebay). But I rather spend the little bit more money and get the cross member and aluminum driveshaft. What kind of clutch are you going to go with?
12-28-2005, 05:12 AM
#50
Join Date: Dec 2005
Location:
Posts: 5
RE: TECH: Manual transmissions, T45, T5, 3650, T-56 ETC
O yeah i know what u mean about ebay but u can get the stuff sepret from D&D so its much cheaper i am going with a spc 3 probobly i havnt really looked into that i went on a few blogs today but havnt gotten enought info to decide yet but from what im hearing about the spec's im going with spec.