My 5.4 4 valve Swap begins... 2002 GT
#31
So here is where things stand:
As you know there was a stoppage due to this little fella coming in 10 days early. Meet the newest Member of the Mustang fan club, Jackson.
As far as the build, this is where it stopped:
As you know there was a stoppage due to this little fella coming in 10 days early. Meet the newest Member of the Mustang fan club, Jackson.
As far as the build, this is where it stopped:
#34
How the wiring goes for the battery terminal posts and junction box.
I can't seem to find the negative terminal... I don't know if he removed it and tossed it somewhere or if he forgot to return it.
I can't seem to find the negative terminal... I don't know if he removed it and tossed it somewhere or if he forgot to return it.
#35
Ok, so I have the wiring to the junction/relay box figured out. Finished bolting up the sub frame brace today. Installed the Cobra Oil Cooler kit, Had to cease work in PLenum/top hat. The stock IAC valve will not work on the Sullivan intake with the water crossover, so I had order the IAC from a cobra to clear it. I am also trying to find an applicable throttle cable. The stock GT/Cobra cables are too short. And lastly I am now I am fighting with Alternator placement.
I got the bracket from Sullivan and purchased a 6.8L Diesel Alt, swapped the pulley but have to fight it mounting it Problem is, if you mount the bracket first, you don't have the room to fit the bolts into the alternator (Side rail and wiring harness in the way).
So I may have to look at fabricating a reverse mount system and use the original alternator
Anyone know of any places with a reverse mount kit for SN95's or am I fabricating.
I got the bracket from Sullivan and purchased a 6.8L Diesel Alt, swapped the pulley but have to fight it mounting it Problem is, if you mount the bracket first, you don't have the room to fit the bolts into the alternator (Side rail and wiring harness in the way).
So I may have to look at fabricating a reverse mount system and use the original alternator
Anyone know of any places with a reverse mount kit for SN95's or am I fabricating.
#39
How Much do you want for it? PM me, I can put the word out.
Congrats on your soon to be coming little guy.
Oh and BTW, I got it to turn over today. WOOHOO!!!!
Just need to run a few vacuum lines and reset the fuel system.
Congrats on your soon to be coming little guy.
Oh and BTW, I got it to turn over today. WOOHOO!!!!
Just need to run a few vacuum lines and reset the fuel system.