Ghostface

Wsup everyone, my '00 GT needs to get a front license plate put on it. The previous owner never put one on because he doesnt want holes in the bumper, but me living in L.A., po-pos always bust you for that. Is there anyway to go around not putting holes in the bumper? Does Ford or another company have a holder instead without drilling holes? Thanks

Jugador1

uhh stick it in the windshield?</P>

ponycar

I had to put holes in my bumper, had to have one of those girly plates.Rhondas Stang!

CobraSVT33

you could try and zip tie it to the bottom of the bumper or</P>


i love things like this custom fabricating...try and make something the you put on the inside of the lower opening on the front bumper that sticks out were you want the plate and make a bracket that attaches tightly that will hold the plate</P>


</P>

Guest

</P>


That's illegal equipment. You can't do that, although people do...and never get busted for it...It has to be mounted to the bumper in some fashion, as long as it can beread and isnot blocked.</P>

CobraSVT33

the guy who gave me an inspection for my winter car pulled my plate from my windshield and zip tied it to my bumper</P>


here in mass all plates must be on the outside and secured in some fashion to the front and rear</P>

Silver4.6

haha zip tied it huh? that guy sounds like a flame job, did he not have any bolts??

BLKSTANG9879

UMMMMMMMMM! Bubble Gum. LOL<IMG src=smileys/smiley4.gif border="0">

Black Horse

Double sided tape!!!!!

Ghostface

thanks for all the suggestions, but it seems like the drill through the bumper is going to be the cleanest and the most secure way of doing this<IMG src=smileys/smiley19.gif border="0"></P>


</P>


I thought Ford would at least make some type of holder for the front.</P>