Does anyone knows?>>
01-26-2004, 01:28 PM
#3
5th Gear Member
Join Date: May 2003
Location: Norfolk, VA
Posts: 2,129
Does anyone knows?>>
C&L is suppsedly coming out with one for $600, and it's supposed to give good gains when used with their upper intake. but i'm not holding my breath till i see dyno sheets.<IMG src=smileys/smiley2.gif border="0">
01-26-2004, 01:35 PM
#4
I ♥ Acer
Thread Starter
Join Date: Jan 2004
Location: United States
Posts: 1,592
Does anyone knows?>>
Originally Posted by Dan02GT
It'll be over $800 bucks for sure, aaaaaain't gonna be worth it pal!
Why not.........it woill be bteer than the plastic s**t we have right now.......</P>
a</P>
01-26-2004, 07:21 PM
#7
1st Gear Member
Join Date: Oct 2003
Location: United States
Posts: 55
Does anyone knows?>>
If your running Nitrous Oxide, any backfire will guarantee a brokenplastic intake. With the aluminum intake I think you will be better off, plus it will broaden the torque curve similar to the bullitt's.
01-26-2004, 07:24 PM
#8
I ♥ Acer
Thread Starter
Join Date: Jan 2004
Location: United States
Posts: 1,592
Does anyone knows?>>
Originally Posted by O1stang
If your running Nitrous Oxide, any backfire will guarantee a brokenplastic intake. With the aluminum intake I think you will be better off, plus it will broaden the torque curve similar to the bullitt's.
</P>
Great answer to my question, that is exactly what I was looking for, now Dan dont miss inform theguys here, it is a good investement worth the $600+ believe me, the plastic POS is going to blow off as sson as I install the turbo added to my N2O system...</P>
01-26-2004, 08:55 PM
#9
2nd Gear Member
Join Date: Nov 2003
Location: United States
Posts: 279
Does anyone knows?>>
BBK is coming out with one in the $500-$600 range, who knows when. Reichart racing has the p51 which looks badass but will cost over a $1200, a bullit intake will cost $700 but you need all the other goodies to go with it for another $500-$600. <edited><editID>DW-03GT</editID><editDate>38012.7888194444</editDate></edited>
01-28-2004, 12:52 PM
#10
2nd Gear Member
Join Date: Oct 2003
Location: United States
Posts: 187
Does anyone knows?>>
Is anyone here familiar with the recall kit or something that came out for the pastic ones. I need to get that for my port and polish job he said the old one i have may crack. In another post soemone gave me a part number for a newer one that has the recall thing for about 380 with aluminum fuel rails and a aluminum bottom plate. I think that is what I need to get any ideas?