$500 to spend
#2
$500 to spend
Originally Posted by 03gtmustang
ok i got $500 to spend on my car right now, i already got, a cold air intake, and a set of flowmasters, what should i do next?
Get a set of gears. 3,73s or 4.10s. I prefer the 3.73s. You should be able to get a set installed at a local shop for 500 or so. I paid about 600 bucks but that was at a dealership. Dont try to do this yourself, its a bitch.</P>
Of all of my current mods, the 3.73s were by far the biggest improvement.</P>
The following links will tell you what your RPM@ speed will be for different ratios, so you can decide which to get if you get em. Use the tire one first to figure tire diameter, then the RPM calc. These are farily accurate.</P>
Tire Diameter: http://www.rx7turboturbo.com/robrobinette/tire_diameter.htm</P>
RPM @ speed: http://www.angelfire.com/fl/procrastination/rear.html</P>
#4
$500 to spend
Originally Posted by jeep45238
NItrous, gears, better rubber compound, or ditchin the flows**tters for some straight throughs.
Agree, ditch the slowmasters <IMG src=smileys/smiley3.gif border="0">, get gears, Nitrous, a blower etc etc..</P>
#5
$500 to spend
Originally Posted by NO2JUNKIE
Originally Posted by jeep45238
NItrous, gears, better rubber compound, or ditchin the flows**tters for some straight throughs.
Agree, ditch the slowmasters <IMG src=smileys/smiley3.gif border="0">, get gears, Nitrous, a blower etc etc..</P>
WHAT?! your contract with flowmaster over? <IMG src=smileys/smiley2.gif border="0"></P>
</P>
to answer the question i think 500, especially 600 is outrageously high for gears. like everyone i know says 400 tops. go 3.73's if you're worried about gas mileage, if not then get 4.10's</P>