Bye Bye Stock bottom end.....
09-05-2008, 09:42 PM
#1
6th Gear Member
Thread Starter
Join Date: Feb 2006
Location: Virginia
Posts: 11,786
Bye Bye Stock bottom end.....
1-195
2-196
3-180
4-125
5-195
6-200
7-190
8-190
I only did a leak down on 3 & 4 and on 3 heard the air coming from the Oil fill, lol and on 4, I heard it come from the intake pipe and the exhaust!
So now the question is.... Build this up and spend 7 grand that I don't have or put in the cobra motor I've wanted for a while still only making the same numbers than I'm making now. Also I've already called around trying to find a terminator motor and II can't find anything right now for less than 13k with a KB, and they wont separate. The average price I have seen them for in the past is 7-8grand.
Someone use some logic on me and set me straight.
2-196
3-180
4-125
5-195
6-200
7-190
8-190
I only did a leak down on 3 & 4 and on 3 heard the air coming from the Oil fill, lol and on 4, I heard it come from the intake pipe and the exhaust!
So now the question is.... Build this up and spend 7 grand that I don't have or put in the cobra motor I've wanted for a while still only making the same numbers than I'm making now. Also I've already called around trying to find a terminator motor and II can't find anything right now for less than 13k with a KB, and they wont separate. The average price I have seen them for in the past is 7-8grand.
Someone use some logic on me and set me straight.
09-06-2008, 09:03 AM
#6
5th Gear Member
Join Date: Nov 2007
Location: Maryland
Posts: 4,955
dudeee.. The Aluminator FTW by ford racing, you can find it on ebay, its The Termi engine with an aluminum block and no s/c, it has sweet *** ford blue valve covers too!
it comes in like 10:1 compression ($56-5800) or 8.5:1 compression ($6-$6400)
find it on an ebay store.
http://cgi.ebay.com/ebaymotors/FORD-...spagenameZWD1V
actually there u go.
it comes in like 10:1 compression ($56-5800) or 8.5:1 compression ($6-$6400)
find it on an ebay store.
http://cgi.ebay.com/ebaymotors/FORD-...spagenameZWD1V
actually there u go.
Last edited by SVTeeshirt; 09-06-2008 at 09:05 AM.
09-07-2008, 06:43 PM
#8
1st Gear Member
Join Date: Aug 2007
Location:
Posts: 62
go pushrod. keep the vortech and look for a 347 stroker. or better yet head over to world products and pick up one of their "Limited Edition" engines.
http://www.worldcastings.com/prods_pages/102075.htm
460ci, 600hp on pump gas, 4500-series Dominator-style carb, world products own heads, and all of this in a 9.5" deck height(351 Windsor) small block that weighs ~400 lb. popular hot rodding lists it at ~$10K. i wanna put one of these things in my 65' someday.
http://www.worldcastings.com/prods_pages/102075.htm
460ci, 600hp on pump gas, 4500-series Dominator-style carb, world products own heads, and all of this in a 9.5" deck height(351 Windsor) small block that weighs ~400 lb. popular hot rodding lists it at ~$10K. i wanna put one of these things in my 65' someday.
