Mach 1 Eaton Swap Build
02-28-2011, 08:49 PM
#33
Resident Ford Troll
Join Date: Jul 2006
Location: Delaware
Posts: 6,717
02-28-2011, 09:11 PM
#34
4th Gear Member
Join Date: Jul 2008
Location: NC
Posts: 1,956
Yeah OP thats not sounding good. Aside from a slight whistle your idle should sound 100% stock. My KB whistles a lil bit but is completely stock sounding other than that. All other eatons i've seen sound very very similar. I probly couldnt tell a diff if I was blindfolded. I hear absolutely no combustion going on in that video and I hear some weird howling.
02-28-2011, 10:11 PM
#35
2nd Gear Member
Thread Starter
Join Date: Jun 2007
Location:
Posts: 275
02-28-2011, 10:15 PM
#36
Resident Ford Troll
Join Date: Jul 2006
Location: Delaware
Posts: 6,717
Hard to tell from just a sound clip man, I'd really have that blower looked at. Maybe you should drop the $$ and send it to steggy to get rebuilt and ported. My L had a st4 steg and it was a beast. At idle it was silent
03-01-2011, 06:19 AM
#37
4th Gear Member
Join Date: Feb 2008
Location:
Posts: 1,799
Send a copy of this video to Posi over at SVTP and have him listen to it, it sounds like theres excessive play either in the front drive or the rear bearings and its causing the rotors to contact the casing. Dont run the car until he gets back to you with the diagnosis!
03-01-2011, 06:35 AM
#38
2nd Gear Member
Thread Starter
Join Date: Jun 2007
Location:
Posts: 275
Send a copy of this video to Posi over at SVTP and have him listen to it, it sounds like theres excessive play either in the front drive or the rear bearings and its causing the rotors to contact the casing. Dont run the car until he gets back to you with the diagnosis!
