New Numbers + Dyno vid!!
#1
6th Gear Member
Thread Starter
Join Date: Aug 2007
Location: MO/ Born and raised in Louisiana
Posts: 10,696
New Numbers + Dyno vid!!
Hey guys its been a lonnnnnng day but well worth it! Took the car back to get re-dynoed today. I went from a 3.33 pulley down to a 3.125 and gained 26 RWHP and 23 RWTQ, at 13 lbs of boost. The rev limiter is set at 7 grand and man does she pull. Right now she's making 524 RWHP and 432 ft lbs of torque!! Don't know why the pics are so small but just click on the pics below.
Dyno Sheet
Vortech whistling (click on pic)
Dyno Session (click on pic)
Dyno Sheet
Vortech whistling (click on pic)
Dyno Session (click on pic)
Last edited by Soldier GT; 05-13-2015 at 09:40 PM.
#5
6th Gear Member
Thread Starter
Join Date: Aug 2007
Location: MO/ Born and raised in Louisiana
Posts: 10,696
#6
6th Gear Member
Thread Starter
Join Date: Aug 2007
Location: MO/ Born and raised in Louisiana
Posts: 10,696
You can and you will. Just so you know I did the 1500 SC build. A member on here helped me out a lot (thxs kerns). If you need help on parts needed let me know. Its not that hard believe me. I did it while deployed to Afghnastain.
#9
6th Gear Member
Thread Starter
Join Date: Aug 2007
Location: MO/ Born and raised in Louisiana
Posts: 10,696
Thanks scoot!! Man that BOV gets so much attention (especially between shifts). Kerns told me to get a 3 psi (pink spring) and once again he was spot on. Meth kit coming soon. Trying to get to 550 + this summer.