99-04 GT/Mach1 Catback on a '98 Cobra
#1
2010 Blue Ball Award Recipient
Thread Starter
Join Date: Dec 2004
Location: Eskimo Village, Indiana *No Igloo*
Posts: 7,907
99-04 GT/Mach1 Catback on a '98 Cobra
Are the mounting points on these two models of cars different, or are the dimensions of the vehicle, and subsequently the exhaust pieces, of a different length?
I'm selling the '99 and having an exhaust pieced together for the buyer, however I intend to give the current Borla Stinger exhaust to my brother for his '98 Cobra.
I'll be removing the entire catback from the '99 regardless if it is a direct swap or not. Worse case scenario the mufflers from the Borla system will be welded into his current setup.
Was just curiuos if the entire system could be transplanted.
Appreciate it.
I'm selling the '99 and having an exhaust pieced together for the buyer, however I intend to give the current Borla Stinger exhaust to my brother for his '98 Cobra.
I'll be removing the entire catback from the '99 regardless if it is a direct swap or not. Worse case scenario the mufflers from the Borla system will be welded into his current setup.
Was just curiuos if the entire system could be transplanted.
Appreciate it.
#3
2010 Blue Ball Award Recipient
Thread Starter
Join Date: Dec 2004
Location: Eskimo Village, Indiana *No Igloo*
Posts: 7,907
Kind of what I was thinking. As I sat around this morning I also realized the tips probably need changed as the 99+ exists through bumper cutouts.
Thanks.
Thanks.
Thread
Thread Starter
Forum
Replies
Last Post
MustangForums Editor
Mustang News, Concepts, Rumors & Discussion
0
04-12-2016 09:36 PM
FordTrax
4.6L General Discussion
3
04-11-2016 09:41 AM