SN95 TFS owners,Vacuum tree on TB elbow
#1
SN95 TFS owners,Vacuum tree on TB elbow
I cant put this vacuum tree ( pic below ) back in with the accelerator calbe installed on the trickflow TB elbow. Can i get liek a 90 degree elbow and point it in a different direction ?
Howd you other sn95 owners with a trickflow intake do yours ?
[IMG]local://upfiles/24448/FABF0C6C44C24D5F840A0F73DA6D9F38.jpg[/IMG]
Howd you other sn95 owners with a trickflow intake do yours ?
[IMG]local://upfiles/24448/FABF0C6C44C24D5F840A0F73DA6D9F38.jpg[/IMG]
#3
RE: Vacuum tree on TB elbow
I don't have an sn 95 so I've never had to deal with that but you can get a brass elbow at lows or home depot in the plumbing section. It looks like thats You just need to find one with a male inlet and femal outlet. If lowes or home depot doesn't have it you can order it from summit. Something like this http://store.summitracing.com/partde...p;autoview=sku
#4
RE: Vacuum tree on TB elbow
Hey goose, you got any pics of it by any chance ?
I had the tree in there, and today i tried to bolt on the accelerator cable and it wouldnt go in because the tree stuck out too far. I've never seen anyone with a sn95 and tfs intake have this problem...
I had the tree in there, and today i tried to bolt on the accelerator cable and it wouldnt go in because the tree stuck out too far. I've never seen anyone with a sn95 and tfs intake have this problem...
#8
RE: Vacuum tree on TB elbow
Thanks man, my car is miles away from me too. If i cant figure something out with an elbow i'll just run a single tree out that is shorter and hook up a 3 way tree from there. That'll be my last resort, but i can still get it done. Thanks for the input.