checking and adjusting valves, how to???
06-28-2007, 02:59 PM
#1
5th Gear Member
Thread Starter
Join Date: Oct 2006
Posts: 2,424
checking and adjusting valves, how to???
my friend has a loud clicking noise on his 86gt same as my car but his is an auto with rebuilt motor. we need the basics on checking and making adjustments to get rid of the noise
06-28-2007, 03:03 PM
#2
Gentleman's Relish
Join Date: Feb 2005
Location: AZ
Posts: 13,090
RE: checking and adjusting valves, how to???
ORIGINAL: 86GT 93LX
my friend has a loud clicking noise on his 86gt same as my car but his is an auto with rebuilt motor. we need the basics on checking and making adjustments to get rid of the noise
my friend has a loud clicking noise on his 86gt same as my car but his is an auto with rebuilt motor. we need the basics on checking and making adjustments to get rid of the noise
06-28-2007, 03:10 PM
#4
Gentleman's Relish
Join Date: Feb 2005
Location: AZ
Posts: 13,090
RE: checking and adjusting valves, how to???
ORIGINAL: 86GT 93LX
he says its the vavles only does it once it warms up, not when cold
he says its the vavles only does it once it warms up, not when cold
06-28-2007, 05:54 PM
#6
3rd Gear Member
Join Date: Oct 2006
Location:
Posts: 775
RE: checking and adjusting valves, how to???
06-29-2007, 06:15 AM
#7
5th Gear Member
Thread Starter
Join Date: Oct 2006
Posts: 2,424
RE: checking and adjusting valves, how to???
i went to his house as soon as he started it i told him hell no shut it off!!! the worst rod knock sound i ever heard!!!we are pulling the motor now, sucks cus he has a supposidely rebuilt motor. it goes ka clack clack ka clack and speeds up with the gas, its bad we tried changing oil n stuff but its prolly a loose cap on a rod or a main thats loose from him beating on it so much. it started as a ticking and whent to a clack according to him. so im helping him pull it and we are dropping the pan to look for loose stuff. wonder what he should all replace if and when we find a loose connecting rod bolt(S)?????
06-29-2007, 09:55 AM
#8
5th Gear Member
Join Date: Oct 2005
Location: Ohio USA
Posts: 4,616
RE: checking and adjusting valves, how to???
ORIGINAL: 86GT 93LX
i went to his house as soon as he started it i told him hell no shut it off!!! the worst rod knock sound i ever heard!!!we are pulling the motor now, sucks cus he has a supposidely rebuilt motor. it goes ka clack clack ka clack and speeds up with the gas, its bad we tried changing oil n stuff but its prolly a loose cap on a rod or a main thats loose from him beating on it so much. it started as a ticking and whent to a clack according to him. so im helping him pull it and we are dropping the pan to look for loose stuff. wonder what he should all replace if and when we find a loose connecting rod bolt(S)?????
i went to his house as soon as he started it i told him hell no shut it off!!! the worst rod knock sound i ever heard!!!we are pulling the motor now, sucks cus he has a supposidely rebuilt motor. it goes ka clack clack ka clack and speeds up with the gas, its bad we tried changing oil n stuff but its prolly a loose cap on a rod or a main thats loose from him beating on it so much. it started as a ticking and whent to a clack according to him. so im helping him pull it and we are dropping the pan to look for loose stuff. wonder what he should all replace if and when we find a loose connecting rod bolt(S)?????
Id replace the oil pump while your their.
Thread
Thread Starter
Forum
Replies
Last Post
TfcCDR
V6 (1994-2004) Mustangs
1
09-14-2015 12:08 PM
