5.0L (1979-1995) Mustang Technical discussions on 5.0 Liter Mustangs within. This does not include the 5.0 from the 2011 Mustang GT. That information is in the 2005-1011 section.

Tie rod ends

Thread Tools
 
Search this Thread
 
Old 07-02-2008, 06:17 PM
  #1  
tmajikman
5th Gear Member
Thread Starter
 
tmajikman's Avatar
 
Join Date: Oct 2006
Location: Woodstock, GA
Posts: 2,594
Default Tie rod ends

I know my drivers side out is bad, but what is the best way to tell if the inner is bad as well. I was able to grab the tie rod and move it real easily.
tmajikman is offline  
Old 07-02-2008, 07:27 PM
  #2  
mjr46
D.R. THE PATHETIC DORK
 
mjr46's Avatar
 
Join Date: Jun 2007
Location: West Virginia
Posts: 30,863
Default RE: Tie rod ends

have some one grab the wheel and rock it gently side to side and look at play on inner
mjr46 is offline  
Old 07-02-2008, 08:17 PM
  #3  
tmajikman
5th Gear Member
Thread Starter
 
tmajikman's Avatar
 
Join Date: Oct 2006
Location: Woodstock, GA
Posts: 2,594
Default RE: Tie rod ends

ORIGINAL: mjr46

have some one grab the wheel and rock it gently side to side and look at play on inner
Thanks for the info Mike.
tmajikman is offline  
Old 07-02-2008, 08:19 PM
  #4  
mjr46
D.R. THE PATHETIC DORK
 
mjr46's Avatar
 
Join Date: Jun 2007
Location: West Virginia
Posts: 30,863
Default RE: Tie rod ends

no problem.. best to have two people when doing it . one to rock it, other to watch for play
mjr46 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
88 orangepeel notch
Street/Strip
4
10-05-2015 09:03 AM
jrrhd73must
Classic Mustang General Discussion
2
10-02-2015 09:17 PM
uedlose
The Racers Bench
4
10-01-2015 08:31 PM
UrS4
S197 Handling Section
1
09-30-2015 10:13 AM
mustangheaven
General Tech
2
09-29-2015 11:00 AM



Quick Reply: Tie rod ends



All times are GMT -5. The time now is 09:40 PM.