1984 gt 350 to dual exhuast
#2
wow almost 900 beans...IMO you can get a complete set up for around or under 500.00.......I'd use a 2 1/2 system on your car as long as it's mostly stock and you don't have big hp plans for it in the future.......either way , you'll need the cross member and the bracket hangers for the right side of the car that the exhaust fit into, and I'd get a set of shorty headers and do away with the exhaust manifolds for a complete set up
#3
You will need a h pipe, this bracket http://www.parts123.com/parts123,intermediate pipe, mufflers, and tailpipes, and a muffler bracket http://www.parts123.com/parts123,and a tailpipe hanger.
#4
Well its the full flow master kit and the cheapest i found that same kit is 650 on summit's site. I just got the car and the exhaust system has many holes in it to i need to replaces it so i'm getting this. And i plan on adding some performance parts on it later. And yeah I'm gonna get some shorties when I get more money after I put the exhaust on.
#5
You will need a h pipe, this bracket http://www.parts123.com/parts123,intermediate pipe, mufflers, and tailpipes, and a muffler bracket http://www.parts123.com/parts123,and a tailpipe hanger.
#8
It's not going to bolt up to the stock exhaust manifolds. If nothing else, pick up a set of 86-93 stock manifolds for now. You'll also need to plug the O2 sensor holes. The rear drivers side hanger is a PITA to put in since your car doesnt have one.
Last edited by Gary H; 12-20-2008 at 08:14 AM.
#9
holy crap that is alot of money!! I Have 3 inch exhaust on my notch and to be honest, it sucks haha. It does sound good dont get me wrong but having 3 inch exhaust is soo pointless unless your above the 500 hp mark or boosting. Ill sell you mine for 500 bucks so i can buy the good 2 1/2 kit!