need ID on heads?
08-30-2009, 02:10 PM
#1
2nd Gear Member
Thread Starter
Join Date: Jan 2007
Location: Manchester TN
Posts: 276
need ID on heads?
Im trying to figure out what heads i have with valve covers on if possible...There not gt40ps but possibly gt40s or e7s. my bro has a 94 5.0 with e7s the only diffrence i see is the number 23 on back of the passenger side and front of the drivers side. Any ideas...or links
08-30-2009, 05:16 PM
#5
Banned
Join Date: Dec 2005
Location: Lil' Rhody
Posts: 22,376
ok, lets try this one more time... we have already established that the heads say 23 on them... so lets get pictures from different angles so we can see other sides of the heads. perhaps pull the valve covers off so we can see the tops of the heads
08-30-2009, 06:37 PM
#7
D.R. THE PATHETIC DORK
Join Date: Jun 2007
Location: West Virginia
Posts: 30,863
if you want to be obstinate and not pull the valve covers, your answers stop here, if they were gt-40's it''ll be stamped in the valvetrain area or have 3 bars on the front of the heads, either remove the covers or the accessories up front or live with not knowing
08-30-2009, 06:39 PM
#8
Banned
Join Date: Dec 2005
Location: Lil' Rhody
Posts: 22,376
any other distiguishing marks, spark plug angle, if you pull the covers we can see if they are infact E7 heads. spark plug angle will tell us if they are gt-40P heads. the "23" that you seem so concerned about is nothing more than a mold number... not a casting identifier. If you want to know what they are, you have to put in some leg work... otherwise, just give up now
i personally get tired of sitting here trying to help people with questions, or problems.. when they are too damn lazy to help themselves
i personally get tired of sitting here trying to help people with questions, or problems.. when they are too damn lazy to help themselves
08-30-2009, 08:34 PM
#10
D.R. THE PATHETIC DORK
Join Date: Jun 2007
Location: West Virginia
Posts: 30,863
haven't you listened to a word both addermk2 and I have said??? that T is not the identifying mark on e7te heads the casting number is on the underside of the intake runners, YOU HAVE not identified properly what you have yet.....so no not thanks anyway.....do not pass go and do not collect 200 dollars, you fail still